Atari Power Supply blowing F2 & F3

Strechman

New member
Joined
Sep 13, 2009
Messages
5
Reaction score
0
Location
Petaluma, California
After putting it off for 2 years, I've began the process of rebuilding my asteroids game that played fine until it lost its picture. I ordered a cap kit for both the GO5-802 and PCB as well as a Power Supply Repair Kit from Bob Roberts. Everything installed cleanly, but when powering up, F2 and F3 blow. I looked for anything obvious and rechecked the newly installed bridge rectifier and all looks right. Any Ideas? http://www.youtube.com/watch?v=E31i_7HGN5I
 
F2 & F3 have nothing to do with the monitor at all.

You need to go back and re-check your work, it would appear that you have either hooked up "Big Blue" wrong, or made a mistake on your A/R I.
 
Thanks, Dokert. I'm rechecking the Big Blue connection and will post any follow-up in the General Repair And Help forum.
 
Back
Top Bottom