Atari power brick

MrGorf

Well-known member
Joined
May 26, 2009
Messages
2,587
Reaction score
420
Location
Exton, Pennsylvania
Re-assembling my pole position 2 project, and just hooked up the power brick. With no load (AR II's not connected), I read 14.6 VDC on the big blue mounted on the floor of the cab. The schematic calls for 10.6 VDC. I know the voltage is unregulated at this point, but is this voltage acceptable? I don't want to hook up the AR II's and overdrive the 3055's.

Thanks
Don
 
Back
Top Bottom