SOLD - PARTS Atari Missile Command pcb -Working

Atari Force

Well-known member

Donor 2011
Joined
Apr 27, 2006
Messages
1,852
Reaction score
743
Location
Altoona, Iowa
Rating - 100%
142   0   0
Working Atari Missile Command pcb. Complete and fully tested. Edge conecctor pin has been repaired board has all new sockets and has been modified to use 2716 roms. $160 shipped to the lower 48. US shipping only. PM if interested.

Thanks

Brian
913c034a9004da7f22d46448d8ec7b37.jpg
411d89a3115bcdbb8bde40cfe059fedc.jpg
5c389a4be82e2eb56a6e3925b42af8b1.jpg
 
Last edited:
A quick question (and free bump) since you seem to work with these a lot: is there a standard way to use an MC PCB in a JAMMA cabinet? There don't seem be to JAMMA adapters for it, and there might be trackball complications. Thanks for any help!
 
A quick question (and free bump) since you seem to work with these a lot: is there a standard way to use an MC PCB in a JAMMA cabinet? There don't seem be to JAMMA adapters for it, and there might be trackball complications. Thanks for any help!
Mapping for the trackball would be the only issue. I mapped through the joystick inputs. For sound, you can use any cheap audio amp.

Brian
 
Last edited:
A quick question (and free bump) since you seem to work with these a lot: is there a standard way to use an MC PCB in a JAMMA cabinet? There don't seem be to JAMMA adapters for it, and there might be trackball complications. Thanks for any help!

I've got JAMMA adapters for MC...

...and adapters to play MC in Crystal Castles....
 
Back
Top Bottom