Atari Middle Earth Fuse Holder Question

puzzledplane

New member
Joined
Jun 22, 2010
Messages
3
Reaction score
0
Location
Jefferson, Massachusetts
Hi, I have an Atari Middle Earth machine that I would like to repair and I was wondering any information on the fuse holder. I was wondering what types of fuses go into the holder and what slots are supposed to be filled?

Thanks,
Puzzledplane
 
Can't get the manual to load right now.... but you can find it here.
http://www.ipdb.org/machine.cgi?id=1590

Should also be a sticker somewhere near the fuse holders on the machine that shows sizes and locations.

Just make sure NOT to use automotive fuses. You need to go to radio shack or a hardware store and get the 250v rated fuses. And make sure to use the exact amperages specified, real easy to fry a board with too hefty of a fuse.

-Hans
 
Can't get the manual to load right now.... but you can find it here.
http://www.ipdb.org/machine.cgi?id=1590

Should also be a sticker somewhere near the fuse holders on the machine that shows sizes and locations.

Just make sure NOT to use automotive fuses. You need to go to radio shack or a hardware store and get the 250v rated fuses. And make sure to use the exact amperages specified, real easy to fry a board with too hefty of a fuse.

-Hans

Thanks, Ive Seen the manual, but it doesn't seem to have the fuse ratings for the fuse holder board that attaches to the MPU. Any one have any ideas or am I missing something in the manual?
 
Back
Top Bottom