Atari Logo stick/leaf switches

Zinfer

Well-known member
Joined
Apr 19, 2008
Messages
4,497
Reaction score
32
Location
Lima, Ohio
Is there a reproduction of the Atari logo stick's leaf switches? The type where the leaf switch has a hole in it's side for mounting? I would have thought that someone reproduced these by now. I've seen 3 posts other than mine of ppl looking for the same leaf switch.
 
Im pretty sure the standard elcheapo leafs that Bob carries will work on these. You can also use microswitches but you will need to install a rubber ring on the actuator.
 
I checked last night. Didn't find the OEM. I don't like rigging up what wasn't stock if I can keep from it. Thanks for the help though. There seriously needs to be a few reproduction runs on those type leaf switches. I'm finding alot of those are breaking off.

Im pretty sure the standard elcheapo leafs that Bob carries will work on these. You can also use microswitches but you will need to install a rubber ring on the actuator.
 
I checked last night. Didn't find the OEM. I don't like rigging up what wasn't stock if I can keep from it. Thanks for the help though. There seriously needs to be a few reproduction runs on those type leaf switches. I'm finding alot of those are breaking off.

If they are breaking off on the back end where you connect the wire, just remove a little bit of the plastic and solder a wire with a male crimp on. Or you can solder directly to the leaf.
 
Naw, all of them I'm seeing are breaking off on the other side of the plastic, the part closest the button. Apparently snaps right off. Matter of factly, the image I used was borrowed from another with the identical problem.
 
Back
Top Bottom