Atari LED lights in a JAMMA setting?

HighScoreSaves

Well-known member

Donor 7 years: 2013-2019
Joined
Mar 23, 2007
Messages
15,831
Reaction score
757
Location
Blaine, Minnesota
Has anyone used the Atari cones for their P1 and P2 in a JAMMA setting?

I want to use these for an AS pcb. I'm getting nothing out of them at all. They both are tested working.

I read a few posts about the lights, I saw a few by Friz. Not interested in the lighting at this time. I just want to get the cones to function correctly.

Any advice on wiring?

Thanks!
 
Well, there seems to be more issues than just the lights...

Now, like another post from pacray, I am having erratic movement with the trackball. Tried another one, still the same issue.

Been thumbing through some posts and see that some say the red pcbs on the trackball are the best, another post saw about the green were ok to use...I'm lost.

Long story short, I'll keep researching the threads and google.

Issues as of now -

1. Atari cone lights - not lighting, how to wire with jamma?
2. Erratic trackball movement, how to fix?
 
Back
Top Bottom