atari kangaroo monitor

pinjoe

New member
Joined
Apr 5, 2010
Messages
8
Reaction score
0
Location
princeton, West Virginia
I am replaceing old electrohome monitor with new cherry master monitor and the atari wiring harness has one yellow, one yellow and green,one yellow and blue, and one green wire and there is a second wiring harness with a purple and white wire and a jumper to a second pin. The cherry master has red/green/blue/black/yellow and white on its wiring harness, does anyone know how to connect this? Any help would be appreciated. Thanks
 
Connect them this way:

Atari -> Cherry Master
------------------------------------------
Yellow/Red -> Red
Yellow/Green -> Green
Yellow/Blue -> Blue
Green/White -> Black
Violet/White -> White

Now, your monitor may work just fine with it wired that way, but if you have a scrambled picture that won't lock in afterwards (and the adjustments won't help), then you need to connect the Violet/White to the Yellow wire also....
 
Last edited:
Back
Top Bottom