FS Game: Atari I, ROBOT project game - Phoenix, AZ

inferno

Member

Donor 2013
Joined
Dec 4, 2010
Messages
114
Reaction score
2
Location
Arizona
Rating - 100%
13   0   0
Here is a group of I, ROBOT pieces that were acquired over a time that I would like to sell as a set. This includes the cabinet, monitor, PCB set and control panel.

The cabinet has the original side art (most of it is still there), but is missing the marquee translite. Inside the cabinet is the original Disco monitor. There is a switching power supply added. It appears that the original I, ROBOT wiring harness is still intact. The back panel for the cabinet bottom is missing. The PCB area back door is something homemade and the monitor back door is original.

The PCB set includes 2 boards back to back and the interconnect board that connects to the wiring harness. I have not tested them.

The control panel has some cracking and cigarette burns.

Better pictures are available -- send PM with your email address.

Asking $700. Can ship entire project via NAVL.
 

Attachments

  • IMG_0443b.jpg
    IMG_0443b.jpg
    96.9 KB · Views: 81
  • IMG_0444b.jpg
    IMG_0444b.jpg
    93.6 KB · Views: 72
  • IMG_0445b.jpg
    IMG_0445b.jpg
    98.3 KB · Views: 65
  • IMG_0446b.jpg
    IMG_0446b.jpg
    88.3 KB · Views: 65
  • IMG_0447b.jpg
    IMG_0447b.jpg
    81.4 KB · Views: 65
More pictures...
 

Attachments

  • IMG_0448b.jpg
    IMG_0448b.jpg
    81.7 KB · Views: 45
  • IMG_0449b.jpg
    IMG_0449b.jpg
    83.2 KB · Views: 42
  • IMG_0450b.jpg
    IMG_0450b.jpg
    91.1 KB · Views: 54
  • IMG_0451b.jpg
    IMG_0451b.jpg
    85.7 KB · Views: 54
  • IMG_0452b.jpg
    IMG_0452b.jpg
    86.6 KB · Views: 50
A picture of the other PCB in the set. The two boards are attached back-to-back and coupled with edge connectors and a wiring harness interface board.
 

Attachments

  • IMG_0453b.jpg
    IMG_0453b.jpg
    77 KB · Views: 19
Back
Top Bottom