FS Parts: Atari Hall effect Joystick rebuilt with NOS parts

Mylstar

Well-known member
Joined
May 2, 2003
Messages
7,833
Reaction score
1,785
Location
Edgewood, New Mexico
Rating - 100%
433   0   0
Used on Roadrunner and Escape from the Planet.
Where is a video of it working.

Stick will need to be calibrated via the pots on the HE board.
One of the screws on HE boat has light rust. I did not have replacements in my Atari stash.

These following NOS parts were installed:
joystick knob/shaft
dust dics
upper housing
plunger
pivot ball
lower ball
plunger spring

$450 shipped via F/F
$550 shipped regular
 

Attachments

  • IMG_5158.jpeg
    IMG_5158.jpeg
    193.3 KB · Views: 21
  • IMG_5157.jpeg
    IMG_5157.jpeg
    191.7 KB · Views: 21
  • IMG_5159.jpeg
    IMG_5159.jpeg
    267.8 KB · Views: 21
I,R used a Rev A board with the calibration done via the I,R test mode. Rev A boards do not have pots on the HE board.
I cannot say 100% sure this will work on I,R so I'm only selling it for Roadrunner or EPROM games
Pictured is an I,R Hal effect board from my stash.
 

Attachments

  • IMG_5160.jpeg
    IMG_5160.jpeg
    506.9 KB · Views: 11
  • IMG_5161.jpeg
    IMG_5161.jpeg
    544.4 KB · Views: 11
Back
Top Bottom