Atari Cardboard Bezel -- Anyone have a stencil or plans?

SteveJ

Member
Joined
Jul 15, 2009
Messages
232
Reaction score
3
Location
Purcellville, Virginia
Atari Cardboard Bezel -- Anyone have a stencil or plans?

Hi --

I want to complete a Tempest restore with the black cardboard bezel that goes around the monitor (under the tinted glass). Yeah, I know, you can hardly see it with the glass over it, but I know it's missing and it bugs me. :)

so first question: is the tempest cardboard bezel the same shape/size as the centipede blue cardboard bezel?

and lastly: anyone have plans or a stencil to make my own bezel?

Thanks!!
 
Judging by the pic on the Arcadeshop website I'd say it's the same.
I have 2 black ones (Star Wars & Crystal Castles) and they both appear to be the same as the Blue one...only black.

Good luck.

ERIC
 
If I managed to do attaching right in KLOV, here's my AI file of the tempest bezel that I believe fits just about any atari cab with a vertical monitor. It's too big to get die cut cost efficiently but you can get them printed at kinko's full size and make a template.
 
I have an original that's out of it's cab right now. I can measure it for you before I put it back in if you like.
 
If I managed to do attaching right in KLOV, here's my AI file of the tempest bezel that I believe fits just about any atari cab with a vertical monitor. It's too big to get die cut cost efficiently but you can get them printed at kinko's full size and make a template.

Not sure it attached.

But if you email it out I could use a copy.

[email protected]
 
prOk is that avatar real pm me to tell me its just funny:)
 
If you want this file just email me and i'll send it. Today only :)
 
anyone that wanted this file but hasn't got it yet please let me know. i need an email address to forward it to.

I forgot to say it, hopefully it's obvious, DO NOT UPLOAD THIS TO ANY WEBSITE.
 
Judging by the pic on the Arcadeshop website I'd say it's the same.
I have 2 black ones (Star Wars & Crystal Castles) and they both appear to be the same as the Blue one...only black.

Good luck.

ERIC

Most Atari games have a different card \ paperboard shroud around the monitor. If you look @ them closely, you'll notice they all have a different P\N & rev on the side tabs. Although they look similar, they're all quite different. The overall opening \ orientation & angle of the monitor vary from game to game. Hope this helps :).

Let me know how you make out.

Benny
 
I sent you a PM.

anyone that wanted this file but hasn't got it yet please let me know. i need an email address to forward it to.

I forgot to say it, hopefully it's obvious, DO NOT UPLOAD THIS TO ANY WEBSITE.
 
I don't believe Tempest and Centipede paper bezels are the same. I thought I had a Tempest one this one time and it wouldn't fit. The Tempest bezel thins at the top to compensate for the glass meeting the monitor closer.
 
sorry to bump such an old post... would anyone still have this file for the tempest cardboard bezel?

Servo
 
I don't believe Tempest and Centipede paper bezels are the same. I thought I had a Tempest one this one time and it wouldn't fit. The Tempest bezel thins at the top to compensate for the glass meeting the monitor closer.

Tempest and Centipede are not the same, and it's not just the blue/black, the pattern is way different.

Tempest/Centipede/Dig Dug cabaret are the same, except the color, black/blue/black
 
Servo, someone on here sells them already done.

I don't remember who. Was it you, Joeycuda?
 
Back
Top Bottom