SOLD - GAME Asteroids project in Chicago

dudah

Active member

Donor 2013, 2023
Joined
Apr 30, 2013
Messages
499
Reaction score
91
Location
Algonquin, Illinois
Rating - 100%
4   0   0
I pulled this game out of a home where it's been for 20 something years. Seller said the monitor went out one day. It was a fuse :p

I rebuilt the monitor and AR board with Ian Kellog kits, reflowed all connectors, replaced all the caps on the PCB, socketed the ROMs, cleaned the legs of all the chips. Edge connector looks good and solid 5V on the AR board. It comes up in test mode with a smaller picture, normal mode results in a single dot on the monitor and flashing start buttons.

Cabinet is pretty nice with no water damage. Silver cone buttons, owl eye door. Bezel overlay is in very nice condition (removed when I was working on the monitor).

I don't have time to troubleshoot the PCB and just want this gone. Asking what I have into it $200, minus my time to get on it and work on it. Pickup in Chicago right off of I-90.
 

Attachments

  • IMG_20170121_165701 (Large).jpg
    IMG_20170121_165701 (Large).jpg
    200.6 KB · Views: 81
  • IMG_20170121_165650 (Large).jpg
    IMG_20170121_165650 (Large).jpg
    200.8 KB · Views: 75
  • IMG_20170121_165641 (Large).jpg
    IMG_20170121_165641 (Large).jpg
    203.8 KB · Views: 74
  • IMG_20170121_165620 (Large).jpg
    IMG_20170121_165620 (Large).jpg
    203.1 KB · Views: 70
  • IMG_20170121_165615 (Large).jpg
    IMG_20170121_165615 (Large).jpg
    205.8 KB · Views: 69
Last edited:
A few more
 

Attachments

  • IMG_20170121_165709 (Large).jpg
    IMG_20170121_165709 (Large).jpg
    199.4 KB · Views: 50
  • IMG_20170121_170201 (Large).jpg
    IMG_20170121_170201 (Large).jpg
    128.3 KB · Views: 60
That is a great price for a great looking machine - and the owly to boot. PCB fix could be a simple as a broken leg on the Y Size pot or one or two ICs in the analog section.
 
Back
Top Bottom