Asteroids inside pics

JoeB1355

Well-known member
Joined
Dec 11, 2010
Messages
1,631
Reaction score
99
Location
Seymour, Tennessee
I am reassembling mine and a few cable loops were installed with hex screws -- I don't think any of this is original and maybe the AR board was upside down -- so looking for a few folks to take some nice inside shots so I can confirm how its supposed to be by looking at a few to get the consensus of how the wires are attached and run
 
Last edited:
PS mine has normal black coin door not owl eye a g02 not a g01

so something of similar vintage in case they are different
 
Last edited:
What exact area would you like photos of? I have a very nice museum quality restored game.

wiring harness on the side where the PCB's are. all the way up to where the monitor cables go.

mine had a few cable clamps but I think it should have tie sstraps and staples like the rest.

I found remants of where the other side and bottom were attached so I pried up the stables and used new tie straps.

Its pretty nice now -- but I want to get the harness exactly right

also trying to find out exact what hardware bolts size etc are for holding in the monitor

I attached a pic of mine before restoration -- I got the interlocks covers etc -- new power switch -- I replaced the wiring for the interlocks and grounds since it was cut short.

you can see the cable clamps on the PCB side -- and the blacks ones where the interlocks go --
 
Last edited:
Here's a few pictures I found of mine.
 

Attachments

  • emptyback.jpg
    emptyback.jpg
    90.9 KB · Views: 29
  • insiderear.jpg
    insiderear.jpg
    98.6 KB · Views: 32
  • coindoorwiring.jpg
    coindoorwiring.jpg
    97.7 KB · Views: 26
  • rearmonitor.jpg
    rearmonitor.jpg
    97.6 KB · Views: 29
Here you go, sorry for getting back to this so late.
 

Attachments

  • DSC02574.jpg
    DSC02574.jpg
    100.1 KB · Views: 12
  • DSC02575.jpg
    DSC02575.jpg
    83.7 KB · Views: 11
  • DSC02576.jpg
    DSC02576.jpg
    98.5 KB · Views: 10
  • DSC02577.jpg
    DSC02577.jpg
    93 KB · Views: 13
  • DSC02578.jpg
    DSC02578.jpg
    99.3 KB · Views: 15
A few more..

Any other angles or photos needed, let me know..
 

Attachments

  • DSC02579.jpg
    DSC02579.jpg
    97.5 KB · Views: 8
  • DSC02580.jpg
    DSC02580.jpg
    79.5 KB · Views: 10
Thanks!

These should be helpful -- I see no cable clamps in either machine that was posted

Did a closer inspection and found a few staple holes so I'll get out the staple gun!
 
Back
Top Bottom