davemcl
Member
I picked up a untested 19V2000 for 1 of the asteroids projects I'm working on. I have a working asteroid deluxe with a working G05-802 monitor in it I plugged the untested 19V2000 into the deluxe cabinet & am getting an orange glow at the back of the crt neck.
1) the connector is comatable. Is the pinout on the molex connector the same for asteroids/asteroids deluxe?
2) is the molex pinout the same for both the G05-802 and the 19V2000?
I'm 99% sure the answer is yes to the first 2 questions, but want to confirm. Here's the real questions now....
3) are the deflector boards in the g05 & 19V interchangable?
4) Is there any danger of me fying the good board by putting it into the non working 19V2000 to test the tube & eliminate the possibility of the problem being a high voltage issue.
5) Is there any danger of me fying anything on my working g05 in the deluxe, by placing the untested board in the working g05?
Thanks,
Dave
1) the connector is comatable. Is the pinout on the molex connector the same for asteroids/asteroids deluxe?
2) is the molex pinout the same for both the G05-802 and the 19V2000?
I'm 99% sure the answer is yes to the first 2 questions, but want to confirm. Here's the real questions now....
3) are the deflector boards in the g05 & 19V interchangable?
4) Is there any danger of me fying the good board by putting it into the non working 19V2000 to test the tube & eliminate the possibility of the problem being a high voltage issue.
5) Is there any danger of me fying anything on my working g05 in the deluxe, by placing the untested board in the working g05?
Thanks,
Dave