asteroid Deluxe

uuv8217

Member
Joined
Nov 16, 2008
Messages
160
Reaction score
2
Location
las Vegas,nv, Nevada
Hello,
I have an asteroid deluxe ,sometimes I turn it on everything works, an than I shut it off and turn it on the next day and it plays blind any clues would be great. It seems intermittant.

thanks
 
Check the connectors from the board to the chassis. Check the edge connector and check the plug in connectors.

My AD played blind and it was just a pin on the plug in connector that was pushed back. Pushed it back in and the monitor came right up. I wasn't sure what the issue was with mine since I hadn't seen it work, but since you've seen your's work and it seems to be an ongoing problem... I'd say it was connection related.

Check all the solder joints under all the header pins on the monitor's chassis as well.
 
Check the connectors from the board to the chassis. Check the edge connector and check the plug in connectors.

My AD played blind and it was just a pin on the plug in connector that was pushed back. Pushed it back in and the monitor came right up. I wasn't sure what the issue was with mine since I hadn't seen it work, but since you've seen your's work and it seems to be an ongoing problem... I'd say it was connection related.

Check all the solder joints under all the header pins on the monitor's chassis as well.

Yes, this. Happened to me as well. Specifically, it's the molex on the power supply. Just pull it up and make sure all the pins are fully pushed in.
 
Back
Top Bottom