Asahi Seiko parts (Nintendo Coin Mech)

[NERDtendo]

OFICIALLY FOR SALE!!!

You are responsible for the part cost, shipping cost and PayPal fees. If you really want to send as gift payment then I won't stop you but I prefer to keep this as legit as possible. I will be using this site for the PayPal fees calculator...

http://ppcalc.com/

If you want to place an order then PM me with the parts and quantities that you need along with your location. I will respond with your total and my PayPal email. If I do not have to quantities you seek of run out of a part I will let you know and allow you to revise your order or be placed on a "Notify when in stock" list. As always, the "PM Sent" thread BUMP is always appreciated.

SHIPPING COST:
Shipping will be entirely done in flat-rate USPS boxes. This is to make everyrhing as simple and fluid as possible. Whatever will fit into the size box is the shipping cost for the entire order. Deliver Confirmation is included in all of the shipping prices (Delivery Confirmation may not be available to all countries). Here are the prices directly from USPS:
Small Falt-Rate Box: $5.20 (domestic) / $11.95 (Canada & Mexico) / $13.95 (all other locations)
Medium Flat-Rate Box: $10.95 (domestic) / $27.95 (Canada & Mexico) / $45.50 (all other locations)
Large Flate-Rate Box: $14.95 (domestic) / $35.50 (Canada & Mexico) / $58.50 (all other locations)
***My wife will only be able to ship on Fridays***

This is the official list of parts that I will be keeping in stock.

Model 740 Parts:

COMPLETE KMW/740 US$0.25 Mech ($45 each)
740 Face Plate US$0.25 ($6.75 each)
740 Cancel Button ($2.00 each)
740 Spring ($0.50 each)
E-Ring ($0.50 each)
Return Cup (larger size than the original but it is still nice and fits just fine on the model 740) ($7 each)

Model 730-A Parts:

COMPLETE 730-A US$0.25 Mech ($52 each)
730-A Face Plate US$0.25 ($6.75 each)
Cancel Lever ($3 each)
Cancel Cam ($1.50 each)
Set Screw ($0.50 each)
Bugle (works on both model 740 and 730-A) ($3 each)

Refurbish Kits:

Model 740 with bugle (includes 1 faceplate, 1 cancel button, 1 spring, 1 E-ring, and 1 bugle) ($12 each)
Model 740 with return cup (includes 1 faceplate, 1 cancel button, 1 spring, 1 E-ring, and 1 return cup) ($16 each)
Model 730-A (includes 1 faceplate, 1 cancel button, 1 spring, 1 E-ring, and 1 bugle) ($14 each)

TEMPORARILY AVAILABLE:
2 x Refurbished model 740 mechs with return cups ($33 each)
4 x Model 740 mechs unrefurbished ($20 each)

***PICTURES ARE ON PAGE 4***

NOTE: My trip to Baltimore is in a month so I will need to take a small break (NOVEMBER 6th through NOVEMBER 20th) to rest and prepare for my trip and then to recover from my trip. If I run low on inventory before then, I will place another order to make sure I am restocked when I get back. Thank you in advance for understanding.

 

[jimkirk]

I will need 2 face plates and bugles for the 730A mechs in addition to 2 KDW face plates and bugles.

 

[JamBurglar]

I need 2 faceplates.

 

[nesjess]

It's "KMW"

Also, you want the small return cups (KMW-3034-10 - $5.16 ea). The large ones are huge and not the right ones for these mechs.

Correct one is on the left:

 

[NERDtendo]

It's "KMW"

I was just going off the Asahi site for the model numbers.

Also, you want the small return cups (KMW-3034-10 - $5.16 ea). The large ones are huge and not the right ones for these mechs.

Thanks for the heads up.

 

[nesjess]

I was just going off the Asahi site for the model numbers.



Thanks for the heads up.

No problem.

Actually, you may be right about KWM. That's what is shown on the site as you said. When the sales rep gave me part #s, he wrote KMW. Probably a typo.

Just didn't want you to overlook those things. Every part has a different code and I made the mistake with my very first order of getting the larger cups. I was not happy to have to ship back and find out they sold out of the small ones at the time (they still get the parts from Japan). Ended up getting the bugles instead. I found old cups later on though.

Thanks for doing this for everyone!

 

[NERDtendo]

Thanks for doing this for everyone!

It's not a problem. I have decided that I can't do anymore of the big cabinet projects (besides finishing my Donkey Kong) because I don't have the strength. However, small stuff that will fit in flat rate boxes or padded envelopes I can handle. I am sick, but I'm not dead. I love Nintendo arcades and figured I could make a little money and help other members out at the same time. Also, I need new mechs for my Donkey Kong.

 

[NERDtendo]

I'm hoping to have the order placed the beginning part of October. I will focus mostly on the cosmetic replacement parts if there isn't much interest in complete mechs. I will still be ordering compete mechs just not many. I haven't forgot about this, I have just been getting some funds together to make the bulk purchase.

 

[bigsleepy]

i could use a couple of the complete mechs w/ faceplate if the price is right.

 

[JamBurglar]

I concur about the small coin cups being the right ones. Although, I'm not sure the small cups are available anymore. When I looked on the site (this was probably a year ago) I was able to track down that picture, but there was no indication you could order the small cups.

 

[NERDtendo]

I concur about the small coin cups being the right ones. Although, I'm not sure the small cups are available anymore. When I looked on the site (this was probably a year ago) I was able to track down that picture, but there was no indication you could order the small cups.

I will be finding out when I order and will post here everything that will be available "officially" when the order is placed. Prices will be posted once everything arrives.

 

[NERDtendo]

It took me all day to get through to someone from Asahi Seiko. When I finally did, he said send an email of what I want and he'll try to take care of it. I later to confirm that he received the email and he informed me that there was a major storm in Las Vegas that took out their internet/ordering abilities. They are getting IT to fix it and he told me to call toorrow morning to clarify the order and find out how muc this will cost me. Here's fingers crossed that the order is placed in full tomorrow morning. Hopefully they have everything in stock.

Stay tuned...

 

[nesjess]

FYI, I made an order last Wednesday and received it on Saturday via FedEx. They ship fast so I'm sure whatever issues they are having, once they get back up, it won't take long to get your shipment.

 

[NERDtendo]

I got a confirmation that they have recieved my purchase order request and are currently working on making sure they got everything to put my PO together. Once the PO is complete, I will pay for the stuff and fun new parts will be on the way.

More to come as the days progress...

 

[NERDtendo]

According to the sales person, the order should be filled and shipped out tomorrow morning as long as there are no discrepancies in the inventory stock...

 

[NERDtendo]

Order paid for and is shipping today. See first post for the details...

 

[Phetishboy]

Sweet, I'll need a few bugles and leevers. There are 2 bugle styles, are you stocking both, or just the U-shaped ones? I guess the heavy style would probably be called "coin catchers".

 

[NERDtendo]

Sweet, I'll need a few bugles and leevers. There are 2 bugle styles, are you stocking both, or just the U-shaped ones? I guess the heavy style would probably be called "coin catchers".

http://www.asahiseikousa.com/product_info.php/cPath/2/products_id/22

I am stocking the U-shaped ones as well as the return cup shown at the bottom right of the page. The return cups I am only stocking the type that goes to these mechs...not the huge ones.

 

[Phetishboy]

Perfect.

 

[nesjess]

Did they have the small return cups in stock? I made an order last week and Dennis (Sales Rep) said they don't carry them anymore so I had to order bugles (U-shaped).