firefgtn8 Member VAPS Joined Dec 21, 2008 Messages 261 Reaction score 2 Location Ohio May 1, 2011 #1 Any idea what needs to be done?
coinopdirect Member Joined Jan 23, 2009 Messages 501 Reaction score 12 Location Midlothian, Virginia May 1, 2011 #2 Failed steering auto calibration at start-up and goes into error or manual throttle calibration?
modessitt Volunteer: Encyclopedia Submission Moderator VAPS Joined Mar 22, 2007 Messages 33,414 Reaction score 325 Location Austin, Texas May 1, 2011 #3 It won't calibrate - or it won't save the settings after you do so and reboot? If the 2nd, your battery is most likely dead...
It won't calibrate - or it won't save the settings after you do so and reboot? If the 2nd, your battery is most likely dead...
OP OP firefgtn8 Member VAPS Joined Dec 21, 2008 Messages 261 Reaction score 2 Location Ohio May 3, 2011 #4 Steering calibration at startup
coinopdirect Member Joined Jan 23, 2009 Messages 501 Reaction score 12 Location Midlothian, Virginia May 3, 2011 #5 Bad (stripped teeth) or missing drive belt. One or both of the fuses blown on the motor driving board Bad potentiometer Bad motor
Bad (stripped teeth) or missing drive belt. One or both of the fuses blown on the motor driving board Bad potentiometer Bad motor