inmyrem
Member
Arkanoid, Neo Geo, Blast City, Hanaho, etc cabinets and pcb's
One spare Arkanoid spinner and another alternate spinner. There is only one small problem with one of the cogs on the Arkanoid spinner having a small crack. It can be fixed with some superglue or just replace that cog.
Arkanoid wiring harness. Monitor connections are cut.
Arkanoid pcb, non-working. Needs one cracked chip replaced.
$50 shipped for all of the above.
SOLDThree non-working Neo Geo boards. Unsure as to exact models due to them being put in storage containers by my wife. She's sure one had four slots and two had two slots and said they have "not working" written in tape on them. Sorry, but I don't have any other info on the boards. I sold off all my Neo stuff awhile ago and thought it was all gone. All three $50 shipped.SOLD
SOLDOne non-working Crystal Castles board. A few chips need to be replaced. - $50 shippedSOLD
Fully working Crystal Castles cocktail. It's pretty damn clean inside and is only missing the underlay and could also use new rollers on the trackballs. The glass has some scratches, but not too bad. I'll let it go for $300.
SOLDA partially working Blast City cabinet. I was truly hoping to have a chance to clean and fix this one up completely and use it. I won't be able to until next Summer. The monitor does not display a picture. That's the only troubleshooting which has been done. When I got it, I didn't have the time to spend on it. I don't know if it's a wiring or harness issue, monitor or chassis issue, etc. It came spliced up for jamma. It is missing the top cover for the control panel to sit on. I have two Sega World Series panels that I was going to piece together to make one 1 player panel with a smaller trackball. Will sell the Blast City as-is for parts or fixing up for $150. Will sell the two World Series panels for $50. Also, I took my pristine 29" vga Nanao MS-2934 only monitor out of one of my other Blast's a few months ago, because I was testing some chassis adjustments on one of the tri-sync's. I really don't want to let this one go as I can still use it and it's gorgeous, but will only sell the monitor for $150 alongside the machine. Will not sell it separately. Willing to ship, but buyer will have to set up shipping. Please PM me your e-mail address for pics as they are too large to attach here.SOLD
SOLDFully working Blast City cabinet with 2 player, 12 button control panel and full Blast/JVS loom cable. I have at least $500 into this one, not counting the computer, which I've taken out. I'm willing to let this one go for no less than $700. I honestly think I'm losing money selling it at that, but without taking the time to hunt down all my receipts to find out what I spent on it over the past few years, this is just an estimated guess. One marquee will be included. I have a few marquees to select from, most of which are shoot-em-ups (shmups) or just a default Blast City marquee. It does not have a kick harness, since I was using a J-Pac wired directly for buttons 4-6 with the computer. I do not have pictures at the moment. Buyer will have to set up shipping.SOLD
Marvel Heroes pachislo machine with 750 tokens. Plays great and everyone has really enjoyed it. Not necessarily needed much now though. Will part with it for $300. Not sure about shipping this one due to the size and weight.
SOLDHanaho Gameroom Classics bartop cabinet without game pcb. Everything is fully functional, barely any scratches on the cabinet, zero burn-in on monitor, just no pcb inside. $100 Might be willing to ship. Another heavy one.SOLD
Not arcade related, but still fun! Tamiya mini Frog remote controller buggy with 1600 battery and quick charger. It's a smaller version of the full size Frog. I'd say about a foot long and around 7 inches wide. It's a decent size for kids and adults. Fully stock, never been raced. Is pretty fast too. Used for maybe a total of 20 hours. Manual and some spare parts included. $130
One spare Arkanoid spinner and another alternate spinner. There is only one small problem with one of the cogs on the Arkanoid spinner having a small crack. It can be fixed with some superglue or just replace that cog.
Arkanoid wiring harness. Monitor connections are cut.
Arkanoid pcb, non-working. Needs one cracked chip replaced.
$50 shipped for all of the above.
SOLDThree non-working Neo Geo boards. Unsure as to exact models due to them being put in storage containers by my wife. She's sure one had four slots and two had two slots and said they have "not working" written in tape on them. Sorry, but I don't have any other info on the boards. I sold off all my Neo stuff awhile ago and thought it was all gone. All three $50 shipped.SOLD
SOLDOne non-working Crystal Castles board. A few chips need to be replaced. - $50 shippedSOLD
Fully working Crystal Castles cocktail. It's pretty damn clean inside and is only missing the underlay and could also use new rollers on the trackballs. The glass has some scratches, but not too bad. I'll let it go for $300.
SOLDA partially working Blast City cabinet. I was truly hoping to have a chance to clean and fix this one up completely and use it. I won't be able to until next Summer. The monitor does not display a picture. That's the only troubleshooting which has been done. When I got it, I didn't have the time to spend on it. I don't know if it's a wiring or harness issue, monitor or chassis issue, etc. It came spliced up for jamma. It is missing the top cover for the control panel to sit on. I have two Sega World Series panels that I was going to piece together to make one 1 player panel with a smaller trackball. Will sell the Blast City as-is for parts or fixing up for $150. Will sell the two World Series panels for $50. Also, I took my pristine 29" vga Nanao MS-2934 only monitor out of one of my other Blast's a few months ago, because I was testing some chassis adjustments on one of the tri-sync's. I really don't want to let this one go as I can still use it and it's gorgeous, but will only sell the monitor for $150 alongside the machine. Will not sell it separately. Willing to ship, but buyer will have to set up shipping. Please PM me your e-mail address for pics as they are too large to attach here.SOLD
SOLDFully working Blast City cabinet with 2 player, 12 button control panel and full Blast/JVS loom cable. I have at least $500 into this one, not counting the computer, which I've taken out. I'm willing to let this one go for no less than $700. I honestly think I'm losing money selling it at that, but without taking the time to hunt down all my receipts to find out what I spent on it over the past few years, this is just an estimated guess. One marquee will be included. I have a few marquees to select from, most of which are shoot-em-ups (shmups) or just a default Blast City marquee. It does not have a kick harness, since I was using a J-Pac wired directly for buttons 4-6 with the computer. I do not have pictures at the moment. Buyer will have to set up shipping.SOLD
Marvel Heroes pachislo machine with 750 tokens. Plays great and everyone has really enjoyed it. Not necessarily needed much now though. Will part with it for $300. Not sure about shipping this one due to the size and weight.
SOLDHanaho Gameroom Classics bartop cabinet without game pcb. Everything is fully functional, barely any scratches on the cabinet, zero burn-in on monitor, just no pcb inside. $100 Might be willing to ship. Another heavy one.SOLD
Not arcade related, but still fun! Tamiya mini Frog remote controller buggy with 1600 battery and quick charger. It's a smaller version of the full size Frog. I'd say about a foot long and around 7 inches wide. It's a decent size for kids and adults. Fully stock, never been raced. Is pretty fast too. Used for maybe a total of 20 hours. Manual and some spare parts included. $130
Attachments
Last edited: