Arkanoid in a Red nintendo Cab

mgkastra

Well-known member
Joined
Dec 18, 2011
Messages
5,488
Reaction score
2,016
Location
Mobile, Alabama
Rating - 100%
50   0   0
Saw someone selling an arkanoid in a red nintendo cabinet. I believe the monitor is a sanyo 20ez, it has the arkanoid board, marquee, spinner, and romstar sideart. I would only want this for the cabinet and monitor and turn it into a DK3.

The cab is slightly beat up, and the t-molding would need replacing, but that is all I can tell from the photos.

In my area games go for a little higher and 60-1's dominate the area, so this seemed unusual to find.

Price check!

Thanks!
 
Yea, $400 seems about right.

A working Sanyo is worth $150 minimum. If the tube and chassis have been cleaned up and rebuilt, then it's worth $200+ in my opinion.

An empty Nintendo cabinet is worth $100 to $150 depending on condition. (Maybe more if it's red?)

If it still has an original Nintendo Power supply inside, those or worth about $100.
 
Thanks everybody! Donkey Kong #1443 will be alive again one day :D

Has the original power supply, but doesn't have a 20ez. Bezel was painted over, and looks like it might be difficult to remove the black paint mask.
 

Attachments

  • IMG_5641.jpg
    IMG_5641.jpg
    524.9 KB · Views: 34
  • IMG_5642.jpg
    IMG_5642.jpg
    288.6 KB · Views: 50
  • IMG_5640.jpg
    IMG_5640.jpg
    331.9 KB · Views: 38
  • IMG_5637.jpg
    IMG_5637.jpg
    330.4 KB · Views: 30
  • IMG_5639.jpg
    IMG_5639.jpg
    344.9 KB · Views: 35
Nice I like it hope you got your price I paid $500 for one non-working with vs conversion.

Now you need Marquee bezel and side art with no Trademark.

Good luck on the Hunt.
 
It has the original ISOLATION TRANSFORMER (black one), but the power supply is not original. You've got a PP-7B power supply in there. The original power supply in the red cabs was a PP-7A.
 
It has the original ISOLATION TRANSFORMER (black one), but the power supply is not original. You've got a PP-7B power supply in there. The original power supply in the red cabs was a PP-7A.

From what I read, the PP-7B might be correct for my early model TKG3 Cabinet.
 
Back
Top Bottom