FS Parts: ARKANOID 2 -Reveng of Doh pcb with harness, marquee, and spinner

crassvw

Well-known member
Joined
Sep 4, 2011
Messages
1,105
Reaction score
27
Location
MARICOPA, Arizona
Rating - 100%
104   0   0
ARKANOID 2 -Reveng of Doh pcb with harness, marquee, and spinner

Up for grabs: original working Tatio ARKANOID 2 (JAMMA)pcb with original wiring harness, marquee (cut to 6 7/8in x 20 7/8in) switches, and working spinner. Would like to sell together for $120 shipped to the lower 48

(also listing a working ARKANOID kit, if you want both, I will take $20 off the total for both
link: http://forums.arcade-museum.com/showthread.php?t=216841)

Trades I will consider: Nintendo Vs games, a Donkey Kong (2 board) PCB, an Icade 60-in-1 (smaller version) PCB, Frogger CPO and cardboard bezel, MINT Popeye bezel, or a MINT MARIO BROS (Wide Body) bezel
 

Attachments

  • 01022012 003.jpg
    01022012 003.jpg
    29.9 KB · Views: 46
  • 01022012 005.jpg
    01022012 005.jpg
    94.2 KB · Views: 30
  • 01022012 004.jpg
    01022012 004.jpg
    31.6 KB · Views: 20
  • 12302011 035.jpg
    12302011 035.jpg
    77.1 KB · Views: 28
Last edited:
Cocktail

Any chance this would work in a cocktail? As I've got the original arkanoid in it (bootlegs seem only to have screen flip).

Seeing as I've had this game for 15 years, it would be cool to upgrade
 
the board is relatively small, approx 8.5x8.5in. If you already have the original Ark in there, you should be fine space wise. (anyone with more exp, feel free to correct me)
 
Any chance this would work in a cocktail? As I've got the original arkanoid in it (bootlegs seem only to have screen flip).

Revenge of DOH! is a JAMMA pinout, not Taito classic like Arkanoid/Tournament Arkanoid. Therefore you will either need to build a Taito harness to Jamma converter (as I have done in my Ark cab), or rewire your cab to Jamma and get a Jamma to Taito converter (to play your current Ark or if you ever want, Tournament Ark)

Revenge does properly support cocktail flipping through a dip switch to set Upright/Cocktail mode.

the board is relatively small, approx 8.5x8.5in. If you already have the original Ark in there, you should be fine space wise. (anyone with more exp, feel free to correct me)

He was asking if it supports cocktail flipping (rotate the screen for 2nd player) which is NOT natively supported by Arkanoid/Tournament Arkanoid and was only enabled by the bootleg versions, oddly enough.
 
Last edited:
good to know, as this one has only been in an UR. I can only imagine how cool it would be to play in a cocktail. Thanks for clarifying and chiming in
 
He was asking if it supports cocktail flipping (rotate the screen for 2nd player) which is NOT natively supported by Arkanoid/Tournament Arkanoid and was only enabled by the bootleg versions, oddly enough.

There are cocktail ROM/microcontroller versions of Arkanoid and Tournament Arkanoid for the real Taito boards. I have owned all four US Romstar releases (Arkanoid upright, Arkanoid cocktail, TA upright, TA cocktail). The cocktail versions are much harder to find, but they do exist.
 
I have a dedicated arkanoid 2 cocktail cab. Works great. In deed it uses a jamma harness so you'll need to do a add one in your cab in case you don't already have one installed.
 
I have a KLOVer expressing insterest in the ARKANOID pcb, ARKANOID 2 ROD pcb with harness and spinner. If I can get others interested in the the ARK harness, spinner, and marquees, I am willing to split the kits!
 
Back
Top Bottom