SOLD - PARTS Area 51 / Maximum Force pcb on metal tray, w/ 2 lightguns and more

dukesilverfan

Active member
Joined
Sep 12, 2016
Messages
320
Reaction score
85
Location
Pennsylvania
Rating - 100%
8   0   0
This has been sold.

--------------



I have a 100% working Area 51 PCB, mounted to its original metal tray. The game has been upgraded with 4 new ROMs and a CF card to play Area 51 / Maximum Force. I am also including the original hard drive and ROMs, which were all working last time it was connected. The PCB is missing the connector that connects the top and bottom PCB, so I soldered wires to the legs. This is clean and very sturdy.

Also included is the 2 lightguns from the cabinet. I believe these are Happ, but they are whatever came with the original cabinet. Both tested and working.

All of that can be yours for $300.

I also have some extras that I can include for an additional cost. I have the original marquee glass, marquee artwork, thick plastic "poster", as well as the print manual. I don't plan on including these unless the buyer wants them.

I ran the service tests, and the ROMs, RAMs, and CF card all test out perfectly.
 

Attachments

  • IMG_3932.jpg
    IMG_3932.jpg
    754.6 KB · Views: 14
  • IMG_3928.jpg
    IMG_3928.jpg
    498.6 KB · Views: 14
  • IMG_3929.jpg
    IMG_3929.jpg
    780.4 KB · Views: 17
  • IMG_3930.jpg
    IMG_3930.jpg
    501.8 KB · Views: 16
  • IMG_3931.jpg
    IMG_3931.jpg
    519.6 KB · Views: 17
Last edited:
Here are a few more photos showing the lightguns and the ribbon cable/ROMs for the original hard drive.
 

Attachments

  • IMG_3933.jpg
    IMG_3933.jpg
    609 KB · Views: 7
  • IMG_3934.jpg
    IMG_3934.jpg
    755.6 KB · Views: 7
  • IMG_3935.jpg
    IMG_3935.jpg
    513.1 KB · Views: 7
  • IMG_3936.jpg
    IMG_3936.jpg
    592.3 KB · Views: 6
It absolutely should. Both cabinets are very similar, if not identical. I think both cabinets are identical dimensions and build, but possibly with slight changes inside. Both are JAMMA, and both use the same style lightguns, just different colors. I can't guarantee that the metal tray is plug and play in the Max Force cabinet (but I don't see why it wouldn't), but the PCB absolutely is.
 
Back
Top Bottom