area 51 max force combo to happ guns no adapt?

r5g

Active member
Joined
Sep 26, 2005
Messages
3,833
Reaction score
14
Location
Nevada
does anyone know how (which pins) to hook new style happ guns to a area 51 max force combo pcb?
here some pix of the gun connector area's
i dont have time to buy an adapter did not think i needed one lol
maybe i can make one?
on the net i read you can just plug it in the first 3 pins then attach red wire to +5 hard drive wire is this right?
 

Attachments

  • 100_6963.jpg
    100_6963.jpg
    58.9 KB · Views: 29
  • 100_6964.jpg
    100_6964.jpg
    69.8 KB · Views: 21
Last edited:
heres how my happ guns hook on. Looks like yours are missing a wire or two. Might still work, i guess give happ a call tommorow and see if theyre compatible or at least adaptable..

mike

attachment.php
 

Attachments

  • PHOT0122.jpg
    PHOT0122.jpg
    94.4 KB · Views: 76
EDIT: my guns only have a red black white and blue

my pcb connectors hav emore colors and some are used some arent..



red black and blue match all the way to the pcb gun connectors so those colors/pin number are correct.

On mine the white wire of the gun goes to the green and yellow wires of the pcb connector pictured.

yours may vary etc but id bet its most likely the same..

If you dont feel like splicing i bet happ or somebody makes a plug and play adapter harness.
 
Happ should have an adapter for that, I know they do them for the Sega games.

I replaced the guns on a Virtua Cop last year with Happ .45s and whatever adapters I ordered weren't the right kind (I think I originally intended to do them on House of the Dead, but found the holsters were far too big to hold the guns)... wound up just splicing direct to the Sega wiring that was in it. lol

wish I had a pinout on the Happ gun wiring. they've worked fine for me, I haven't even had to open them.
 
Back
Top Bottom