8bitnintendo Well-known member VAPS Joined Apr 23, 2008 Messages 4,424 Reaction score 351 Location Rocklin, California Aug 22, 2009 #1 One of my guns on Area 51 isn't working. I replaced the optics inside the gun, now it just reloads when you pull the trigger during the game. What can I look at next to troubleshoot???
One of my guns on Area 51 isn't working. I replaced the optics inside the gun, now it just reloads when you pull the trigger during the game. What can I look at next to troubleshoot???
Fibonacci New member VAPS Joined Feb 17, 2007 Messages 1,986 Reaction score 3 Location Moscow, Idaho Aug 22, 2009 #2 Does it have the lens that goes in front of the optics? Is that lens clean? Is the sensor on the front of the new optics aligned properly? The fact that it is reloading means that it does not see the screen. Have you tried the gun calibration?
Does it have the lens that goes in front of the optics? Is that lens clean? Is the sensor on the front of the new optics aligned properly? The fact that it is reloading means that it does not see the screen. Have you tried the gun calibration?
titanfan New member Joined Oct 27, 2007 Messages 191 Reaction score 0 Location Tennessee Aug 22, 2009 #3 also try to turn up the brightness on the monitor. make sure the plexi on the front is also clean.
cadillacman Well-known member VAPS Joined Nov 25, 2007 Messages 15,504 Reaction score 542 Location Roscoe, Illinois Aug 22, 2009 #4 heres a happ breakdown of the gun... http://www.happ.com/amusement/optical/96210017e.htm do you have all these parts????? if your missing the lens or the rectangular box thing that is most likely your problem.. or one of the wires is broken inside the guns tubing.... did you swap gun wires at the board to verify its not a board issue?
heres a happ breakdown of the gun... http://www.happ.com/amusement/optical/96210017e.htm do you have all these parts????? if your missing the lens or the rectangular box thing that is most likely your problem.. or one of the wires is broken inside the guns tubing.... did you swap gun wires at the board to verify its not a board issue?
OP OP 8bitnintendo Well-known member VAPS Joined Apr 23, 2008 Messages 4,424 Reaction score 351 Location Rocklin, California Aug 22, 2009 #5 I have the lens, no rectangular box thing in any of them.