Ardac bill acceptors on Williams coin doors

KenLayton

In Memoriam
Joined
Dec 14, 2003
Messages
20,220
Reaction score
712
Location
Olympia, Washington
I've made up a drawing and picture of an adapter harness I made. This allows you to use an Ardac "USA3" upstacker bill acceptor on the Williams coin doors with the lower cutout hole. In the machines factory wired for a 120 volt AC Mars bill acceptor with the 9 pin connector, one end of the adapter harness plugs into that connector. The other end (12 pin) plugs into the Ardac bill acceptor.

Here is a picture of one installed on a Demolition Man pinball coin door.
 

Attachments

  • Ardac to Mars.JPG
    Ardac to Mars.JPG
    55.1 KB · Views: 21
  • Ardac to Mars adapter.pdf
    26.1 KB · Views: 10
  • DSCF1656.JPG
    DSCF1656.JPG
    54.1 KB · Views: 20
Back
Top Bottom