Arctic Thunder no test mode

Molgaven

New member

Donor 2017
Joined
Jul 15, 2017
Messages
29
Reaction score
0
Location
madison, Wisconsin
Game came up with the typical wheel error screen after the testing screen
"whoever wrote the software for this game needs to be flogged"
tried to go into test mode but the game just resets back to the "Testing" countdown screen and will not go into test?

tried a different IO board, wheel board, reseated connectors, looked for a ground short... tried pulling all the inputs off of the IO board but the test button connector... still just loops to the testing screen and will not enter test.
 
Last edited:
I was kinda leaning towards a hdd issue... thanks for the input... i'll have to see if my spare is any good
 
Back
Top Bottom