Arcadeshop Multi Williams Blank Control Panels are in

Phetishboy

Well-known member
Joined
Dec 12, 2006
Messages
47,929
Reaction score
9,392
Location
Avon, Minnesota
Arcadeshop Multi Williams Blank Control Panels are in

But they only have the wide cab size (Joust, Stargate, etc) and they have seen a $30 price hike from $45 to $75. Oh well, mine is finally on the way.
 
Are they completely blank (i.e. no holes in the top) or are they punched for the AS multiWillams CPOs?

ken
 
Well that sucks. Been waiting for them to be back in stock. Got one of those Joust themed multi CPO's that Bacon designed. Crap.
 
I was thrilled enough to simply have my friend make me one for free and NOT have to call AS and hear their bullshit story of "call back in about a 1.5 weeks".
I asked my buddy how much in materials and how long did it take him.
He said, "well....... I wasn;t watching a clock but I would say it took me ~1 hour. material would be ~$20.00.

So the one he made me doesn't have the bolts welded in place and the other holes pre drilled. Not arguing their price - just trying to give people an idea of how much they have invested into each panel.

Hey Phetterson do me a favor. Lets see if the AS CPO hole placements are different than the one I bought from Arcadeoverlays.
Measure a few places for instance left side into middle of P1 start button
Measure outside left to center of P1 joystick and do the same for P2 but from the right.

Also - are you using a Wico stick? I've read and also personally experienced where the joystick hits the glass catch on the left side which stops you from being able to actually latch the CP down. The fix is to cut around 3/4" off that glass catch "wood slot the glass sits in" then your CP will close.
 
Hey Phetterson do me a favor. Lets see if the AS CPO hole placements are different than the one I bought from Arcadeoverlays.
Measure a few places for instance left side into middle of P1 start button
Measure outside left to center of P1 joystick and do the same for P2 but from the right.

I am no one's bitch. (Unless you are a 10 time paying customer and bring your own embroidered mansaddle.)
 
Lets see if the AS CPO hole placements are different than the one I bought from Arcadeoverlays.

Yes. The holes are different. The overlay you bought from Arcadeoverlays (which is the the old Phoenix Arcade overlay) will not line up with the AS control panel. The start buttons and the Inviso button will not line up.

WMPanelLight.jpg

multiwilliams-panel-complete.jpg
 
I guess that sums that one up thank you!
I see a few small differences - the P! reverse button is lower as well. I guess it doesn;t matter they are indeed much too different.

And Phet - you may not be my bitch but you are A bitch none the less.
I only accept the finest bitchest unlike your ghettoriffic stretched fecal droppin ass
 
Last edited:
well, i gotta say the price increase is bullshit. I'll make my own before i pay that.
 
Back
Top Bottom