ArcadeShop Jamma Zookeeper Adapter

Roadrunner000

Well-known member
Joined
Sep 5, 2002
Messages
5,223
Reaction score
109
Location
Pittsburgh, Pennsylvania
Anyone have a picture of you hookup for the JROK Multi Zookeeper board in dedicated cab....specifically I wanted to see how the small red and black sync connectors on the jamama adapter which appears to be to short on my adapter are hooked up properly so it all fits...
 
disregard..got that issue fixed..now working on another issue..no response on the controls to get off the main menu..only thing that works is the up and down..but can't get out of main menu..:mad:
 
Anyone who has the jrok zoo keeper multi board hooked up to your original cab with the dedicated wiring and arcadeshop jamma adapter. Any issues with controls not all working?. Im having weird issue with no jump buttons or start buttons working. I need to see your wiring on the control panel connector where it plugs into jamma adapter to see if there is something with my original wiring that is off. Its original but you never know and i dont have schematics on the adapter to know its pinout to verify
 
I have the Zooq in my ZK, but I use Mark Spaeth's ZK to Jamma and mine works perfectly. I know Mark's adapter has a Qix CP header and ZK header and if you use the wrong one, it won't work right.
 
Got it...the jumpers came shipped in wrong place..they were on proper side for my zookeeper but orientated the wrong way..adjusted them and works fine...oh well live and learn ..never assume anything ships correct..check everything..of course no way to know that since there isn't a manual for this..LOL Your flying in dark :D
 
Back
Top Bottom