SOLD - PARTS Arcadeshop Arcadesd Programmable Multi PCB Vert

[gsrogers]

You may remember these from back in the day (circa 2009-2010ish). They were sold through Arcadeshop and created by Clay Cowgill, these were the bomb when they came out. Then there was the whole fiasco and support ended for them (which I understand).
They could be programmed with a specific set of Horizontal or Vertical games. Do some research if you are not familiar with this board....you would have to currently have the program and roms in order to change the game list.

By the way that is not a VGA connector on the board....it is a serial port for programming. This board is for a CGA monitor. Here is a link that kinda talks about it.

https://wishesandhorsesblog.wordpress.com/2017/07/01/arcadeshop-multi-pcb-arcade-jamma-board/


Board is currently programed with the following:
Ms. Pacman
Donkey Kong
Donkey Kong 3
Tetris
Galaga
Pooyan

$325 shipped to US (paypal F&F please)
Thanks
Garry

 

[tebright1]

Is the programmer still accessible for download?

 

[gsrogers]

No...that is why I stated you have to currently have the program and roms.

 

[r3v]

No...that is why I stated you have to currently have the program and roms.

I was curious about this and did some digging, last working page about this product on arcadeshop was January 2009:
https://web.archive.org/web/20090830062614/http://www.arcadeshop.com/multi-pcb/multi-pcb.htm

More googling and found this webpage that still has the software and roms (minus DK2, apparently need a license for that one): http://arcade.spleck.net

 

[gsrogers]

Thanks r3v for the detective work. I thought the support was unobtanium. It would be great to finish out the game list.

Garry

 

[parism]

I was curious about this and did some digging, last working page about this product on arcadeshop was January 2009:
https://web.archive.org/web/20090830062614/http://www.arcadeshop.com/multi-pcb/multi-pcb.htm

More googling and found this webpage that still has the software and roms (minus DK2, apparently need a license for that one): http://arcade.spleck.net

This deserves a REP, coming your way...

 

[gsrogers]

Maybe I missed the fair price for this...let me know what you think and shoot me an offer

 

[alfonzotan]

I have an earlier (non-reprogrammable) version of this board that was in with my bootleg Galaga-Ms Pac cab when I rescued it. Excellent implementation, far better than a 60-in-1 in both game selection screens and actual gameplay.

 

[ThumB]

I have all the info on this board if anyone buys it. that said, I'd pull that price down a bit to maybe around 175-185. It is a great and very acurate emulation pcb and has a great interface. the serial programming is a bit wonky but not that hard if you have to correct HW

 

[BustedArcade]

I have all the info on this board if anyone buys it. that said, I'd pull that price down a bit to maybe around 175-185. It is a great and very acurate emulation pcb and has a great interface. the serial programming is a bit wonky but not that hard if you have to correct HW

I have this board in my Reunion and love it. I bought it on KLOV in 2015 for $150 so I think your estimate of $175-$185 is pretty spot on.