Arcade Machines for Sale/Trade (Robotron, Time Pilot, Zaxxon..& some trade only items
Here are a few machines ready for sale or trade. My want list is at the bottom of this post for those that dont already know. Delivery from here (VA) to GA might be available for a small fee. I should start having machines again now that I finally have wheels again.
You can find pics of some of the machine here http://www.flickr.com/photos/djdns/
1. Dedicated Robotron (SOLD) Works, I just fixed the bottom of the cabinet all the way around since it had bad wood splitting from being moved around without feet. I also filled in a 2 or 3 small areas a well. All it need is the sides and small areas that I've fixed to be repainted and new feet at the bottom. I did all the hard work already. I also repainted the black area and put a new overlay on. Yes it has the 4" shafts on the leaf switch bases.
2. Dedicated Time Pilot (PENDING). Works, just need the original overlay if your picky.
3. Dedicated Zaxxon $250 Works, nice cabinet, just needs the correct joystick and maybe a cap kit. I just found the correct joystick on another control panel which your welcome to have. Monitor looks to have a wg 7900. Pics are up now.
4. Neo-Geo 1 slot works with nice monitor in a Dynamo cab (SOLD)
5. My Sega Daytona Twin $700 in the garage that I seem to never be able to get too. Both work I think there is something wrong with the feedback. Im not sure because I think it worked last time I plugged it up, but I'll just say the feedbacks on the steering on both dont work.
6. Taito cab wired for jamma and working (PENDING) I was going to make this into a Multi Taito but dont have the time right now. I started to sand it down and thats as far as I got.
7. I also have these items I would only trade for certain items on my list *these are not for sale only trade* (Reator working main cpu, Working berzerk zpu 1000 with high score save kit/battery, Muti-Taito pcb, J-Rok pcb, Marble Madness pcb, Gorf working pcb set in cage, Multi-Exidy kit that I just bought hoping to trade someone something for it, but didn't pan out as planned)
8. 10 x 10 Black Light Carpet (PENDING TRADE/SALE)
9. Just added a few project cabs & machines to my flickr for trade or sale
10. Nintendo Vs machine coming soon I will make it a Super Mario Bros, Hogans alley or Duck Hunt
****************Updated list of items I need for 2011********************
1. Reactor cabinet empty or project machine
2. Super Bagman or Bagman machine, PCB, CPO, Marquee
3. Qbert NOS sideart
4. Juno First Machine
5. Qbert Qubes machine / project or control panel, cpo, bezel, sideart
6. Qbert nice original or repro bezel
7. A nice Atari Assault doesn't have to work, but looking for the cabinet to be in good shape
8. Timber cabinet wiring, bezel, marquee & control panel
9. Playchoice 10 (single monitor cpo)
10. Donkey Kong (1 side of nos side art)
11. Galaga cabinet in good condition doesn't have to be complete
12. Track & Field sideart
12. Zoo Keeper contol panel overlay
13. Whirlwind Pinball (new fan topper)
14. Arcade Flyers (Asteroids Deluxe, Defender, Gyruss, Joust, Mario Bros, Zeke's Peak, Tekken 5 Res)
15. Taito Cabinet (Tan colored one that the Tin Star came in)
16. Atari Assault (Side Art / CPO)
17. Ghost Squad : Version A (Upright or kit)
18. Mad Panets Machine
19. Mikes Arcade 2 in 1 Jamma Adapter
20. Galaga sideart & joystick adapter for a 4 way
21. Nice burn free 4900 monitor or just a tube
22. Multi-Williams control panel, cpo, bezel, marquee
23. Namco System256 EXCARD PCB for Tekken 5 card readers
24. 60 in 1 pcb
Here are a few machines ready for sale or trade. My want list is at the bottom of this post for those that dont already know. Delivery from here (VA) to GA might be available for a small fee. I should start having machines again now that I finally have wheels again.
You can find pics of some of the machine here http://www.flickr.com/photos/djdns/
1. Dedicated Robotron (SOLD) Works, I just fixed the bottom of the cabinet all the way around since it had bad wood splitting from being moved around without feet. I also filled in a 2 or 3 small areas a well. All it need is the sides and small areas that I've fixed to be repainted and new feet at the bottom. I did all the hard work already. I also repainted the black area and put a new overlay on. Yes it has the 4" shafts on the leaf switch bases.
2. Dedicated Time Pilot (PENDING). Works, just need the original overlay if your picky.
3. Dedicated Zaxxon $250 Works, nice cabinet, just needs the correct joystick and maybe a cap kit. I just found the correct joystick on another control panel which your welcome to have. Monitor looks to have a wg 7900. Pics are up now.
4. Neo-Geo 1 slot works with nice monitor in a Dynamo cab (SOLD)
5. My Sega Daytona Twin $700 in the garage that I seem to never be able to get too. Both work I think there is something wrong with the feedback. Im not sure because I think it worked last time I plugged it up, but I'll just say the feedbacks on the steering on both dont work.
6. Taito cab wired for jamma and working (PENDING) I was going to make this into a Multi Taito but dont have the time right now. I started to sand it down and thats as far as I got.
7. I also have these items I would only trade for certain items on my list *these are not for sale only trade* (Reator working main cpu, Working berzerk zpu 1000 with high score save kit/battery, Muti-Taito pcb, J-Rok pcb, Marble Madness pcb, Gorf working pcb set in cage, Multi-Exidy kit that I just bought hoping to trade someone something for it, but didn't pan out as planned)
8. 10 x 10 Black Light Carpet (PENDING TRADE/SALE)
9. Just added a few project cabs & machines to my flickr for trade or sale
10. Nintendo Vs machine coming soon I will make it a Super Mario Bros, Hogans alley or Duck Hunt
****************Updated list of items I need for 2011********************
1. Reactor cabinet empty or project machine
2. Super Bagman or Bagman machine, PCB, CPO, Marquee
3. Qbert NOS sideart
4. Juno First Machine
5. Qbert Qubes machine / project or control panel, cpo, bezel, sideart
6. Qbert nice original or repro bezel
7. A nice Atari Assault doesn't have to work, but looking for the cabinet to be in good shape
8. Timber cabinet wiring, bezel, marquee & control panel
9. Playchoice 10 (single monitor cpo)
10. Donkey Kong (1 side of nos side art)
11. Galaga cabinet in good condition doesn't have to be complete
12. Track & Field sideart
12. Zoo Keeper contol panel overlay
13. Whirlwind Pinball (new fan topper)
14. Arcade Flyers (Asteroids Deluxe, Defender, Gyruss, Joust, Mario Bros, Zeke's Peak, Tekken 5 Res)
15. Taito Cabinet (Tan colored one that the Tin Star came in)
16. Atari Assault (Side Art / CPO)
17. Ghost Squad : Version A (Upright or kit)
18. Mad Panets Machine
19. Mikes Arcade 2 in 1 Jamma Adapter
20. Galaga sideart & joystick adapter for a 4 way
21. Nice burn free 4900 monitor or just a tube
22. Multi-Williams control panel, cpo, bezel, marquee
23. Namco System256 EXCARD PCB for Tekken 5 card readers
24. 60 in 1 pcb
Last edited:


