Arcade Cabinet Help

X3R0102

New member
Joined
Feb 21, 2011
Messages
7
Reaction score
0
Location
South Carolina
Well if anyone can help me identify what this cabinet was before would be a good start. It came with controllers that fit the cabinet for NFL Blitz but this does not look like One I have seen so my guess was it was rebuilt, but from what or was this a ground up project? Also inside the Coin op says Ninja Gaiden but that could of just came from one.

The 2ed problem I had was the lights came on letting me know the power worked inside but when I found the switch on the back (I am guess it is a on and off) I could not flip it. So I pulled it off to look at it and figured I had to replace it. Well when I put it back I guess I missed two ground wires and when I plugged it in it flipped the breaker and may of melted the plug a little bit . My question now is was the plug melted from no ground or was it like that before and I just missed it?
 

Attachments

  • IMAG0449.jpg
    IMAG0449.jpg
    104.8 KB · Views: 13
  • IMAG0395.jpg
    IMAG0395.jpg
    99.1 KB · Views: 24
Not sure about the power problem. That cabinet was a generic "kit" cabinet commonly called a Z-back because of it's shape. They were sold usually with no game in it, then the operator bought a kit and installed it. So it'd be pretty hard to tell what was first installed in it.
 
Back
Top Bottom