Arachnid Galaxy Top Gun Challenge monitor replacement

bluestreak

Member
Joined
Oct 25, 2009
Messages
344
Reaction score
4
Location
Spring, Texas
Arachnid Galaxy Top Gun Challenge monitor replacement

OK, so I buy this cool dart board quite a few months ago because we have a Super 6 already and enjoy it, but this one is missing a monitor and just a bit of water damage which I have already repaired.
So, I'm thinking, how bad is it going to be to find some type of replacement monitor for it. Not bad right?
OK, Big, Big Wrong!

Since I'm not an Op or have a business dealing with these,(lack of contacts) I'm finding it EXTREMELY hard to either locate a replacement monitor within reason or some type of other 12" monitor that will fit in there.
This dart bd uses a composite output so I could put a flat panel on top, but just not the same and would push the investment on this dart board over it's value in which case I could have just bought a complete one. Maybe...

Anyway, now that I've made a short story long, what does everyone else do on these when the monitor disappears? Anyone know where I might find a replacement monitor?
Any sane suggestions are welcome. (I know how suggestions can go wild/comical on here. :) )

Thanks in advance,
Bluestreak
 
I think it had a Magnavox/Phillips "Computer Monitor 80" (a.k.a. model BM7522) in there. Some had a Goldstar model MBM-2105A monitor installed.
 
Last edited:
Thanks Ken
You also helped me out on my Super 6 machine and now it works great.
I think the Top Gun actually used the Krystel12 monitor from what I've researched, but I would use anything I could find that fits.
I already blew $40 bucks on ebay for a security monitor that I thought would fit in it, but the tube neck and case are just too long.
Lesson learned I guess.

Anyone looking for a 12" security monitor? :)
 
Bump,
So no other ideas as to what might fit in this board?
If not that's fine, I'll just keep on searching, but wanted to check one last time.

Thanks
 
Back
Top Bottom