Arachnid Dart Board

Bullet90

New member
Joined
Jul 3, 2010
Messages
2
Reaction score
0
Location
Pennsylvania
Hello
I am a new-b. I have a wall mounted Arachnid English Darts that was given to me. I know this is a good board and would like to fix it. When I got it, the AC adapter was bad and would not respond when I hooked a universal adapter to it. I traced appx, 9v to the voltage regulator, LM2940CT-5.0. I was only getting 0.36V output. I replaced the regulator with a similar, not exact, replacement. It is also a 5.0 V output. Now the board lights up with random garble on the LCD without pressing the power/enter button. I am now getting 3.08V output from the regulator and 1.2V to power/enter switch but pressing it does nothing. I unplugged the matrix ribbon cable with no effect. Is the board fried or what? Here are some specs:

Arachnid English Darts
1950EMD
p/n 39170
PCB 1995 #39104 Masked 1950EMD
Software Chip - Arachnid Inc 1996 39139 Ver 1.00
Thanks for your help..
 
Thanks Ken
But "Arachnid, Inc. no longer manufactures the home electronic dart boards."
I guess it is DMIspotrs.com now. I will try to email them.
Thanks again.
 
Back
Top Bottom