Arachnid dart board help

smitymike11

Active member
Joined
Dec 5, 2011
Messages
1,635
Reaction score
16
Location
Twin Lake, Michigan
Where is a good source for parts for these? I want to price it out and see if it is worth fixing the two I just bought. If not I will just use them as a cab for a reg dart board. From what I can tell they are missing the dart board, monitor and power supply.
 
Replacing those parts with actual good ones will cost you roughly twice what a complete working unit would sell for.

Where is a good source for parts for these? I want to price it out and see if it is worth fixing the two I just bought. If not I will just use them as a cab for a reg dart board. From what I can tell they are missing the dart board, monitor and power supply.
 
I had the English Mark Darts Super Six and I think I just traded it for a jamma game or sold it for $200 or something. I remember the parts being outrageous on them, probably because lots of dart boards are still being operated.

You will spend more than $250 getting a monitor, a good dart board/head and a power supply.

Yep,i sold my super 6 working all the way for $150.
 
I've got a target head assembly, no switch matrix, just spider and segments (single bull) I'd sell you for $35 shipped if you want it.
 
You also have to get the right switch matrix for your unit, there was an upgrade that required some sort of board change. I remember Ken Layton talking about it at one point.
 
I would seriously ask Ken Layton your questions, including where to source parts. I remember him going all genius about them in an old thread.
 
I bought two of these some time ago for $50 and got one going by replacing the power supply. There was a seller on eBay that had tons of parts for these including tested working power supplies. I can see if I can figure out who it was from my old PayPal e-mails. It's been a few years.

BTW - I absolutely love this dart board. My wife and I played this board a lot in the bars when we were dating. So, it's an awesome addition to my 'cade. :)
 
ASK KEN!!! I have an engligh mark darts by arachnid i believe setting here for parts that is missing the dart matrix and monitor. I think it has the power supply and other boards if your interested I'll go look at it and see.
 
ASK KEN!!! I have an engligh mark darts by arachnid i believe setting here for parts that is missing the dart matrix and monitor. I think it has the power supply and other boards if your interested I'll go look at it and see.


I think all the boards are in them, just missing one power supply.
 
ASK KEN!!! I have an engligh mark darts by arachnid i believe setting here for parts that is missing the dart matrix and monitor. I think it has the power supply and other boards if your interested I'll go look at it and see.


What is Kens user name on here? How much for a power supply?
 
I believe his user name is ... wait for it.... Ken Layton. Go to the repair subforum and his posts are all over.
 
Back
Top Bottom