Anyone with a NEO 29 Cab Cab orig wiring pics please.

Krusher

New member

Donor 2015
Joined
Dec 5, 2009
Messages
2,176
Reaction score
35
Location
Montebello, California
Anyone with a NEO 29 Cab Cab orig wiring pics please.

Hey everyone.

I'm sure you all have seen my threads on trying to figure out wiring and the switch in mycab. What I am looking for is if anyone who has a candy 29 with ORIG wiring can please take pics of the connections. One of power supply and connections on top. The junction connector between the speakers and lower harness (sits above power supply area). connections to the speakers. and any other junction points.

Cab pics on this thread http://forums.arcade-museum.com/showthread.php?t=118344

I would really appreciate it. I am going to be removing the switch and from the diagram I am looking at there may be a few other changes. (Example when I look at the connection which goes up to the speakers, right by the power supply there is a midway connection and it looks like ground (green) goes from one connection to the other?...

I just want to be able to make sure I am reconnecting the right connections and everything looks the same, and is correct on mine. As of now this switch while wired in place and a GREAT idea, dosen't seem to be wired properly. and before i get my board in or jamma adapter I wanna make sure everything is back to factory..

Thanks all.. This place has been more than helpful and more than I could ever ask for in a forum online.
 
Last edited:
Anyone? ;)

=-)
anyone??
Lol
bump..

Hey everyone.

I'm sure you all have seen my threads on trying to figure out wiring and the switch in mycab. What I am looking for is if anyone who has a candy 29 with ORIG wiring can please take pics of the connections. One of power supply and connections on top. The junction connector between the speakers and lower harness (sits above power supply area). connections to the speakers. and any other junction points.

Cab pics on this thread http://forums.arcade-museum.com/showthread.php?t=118344

I would really appreciate it. I am going to be removing the switch and from the diagram I am looking at there may be a few other changes. (Example when I look at the connection which goes up to the speakers, right by the power supply there is a midway connection and it looks like ground (green) goes from one connection to the other?...

I just want to be able to make sure I am reconnecting the right connections and everything looks the same, and is correct on mine. As of now this switch while wired in place and a GREAT idea, dosen't seem to be wired properly. and before i get my board in or jamma adapter I wanna make sure everything is back to factory..

Thanks all.. This place has been more than helpful and more than I could ever ask for in a forum online.
 
Anyone?? please??

I really wanna do this today, but the wiring diagrams I found so far are the SUPER Neo 29.
and there are some things different. Help a guy out on his B-Day :)
 
cool aprecate it.

cool aprecate it. I might just take switch out for tonight and lable the main board connector side. that dosent leave a doubt with that side =).

to bad description wasn't matching ready to go with jamma mvs switch lolol.

thanks though. look forward to seeing those pics.
My Neo 29 has original wiring and is unhacked... if you can wait till the weekend I'll take a bunch of pics for you...
 
hello doc :)

Doc You able to get those picss mabey today?? :)
I got my Jamma adapter, Nep 4 slot.
Once im soldered were ready to roll and change out joystick
when it comes lololol


My Neo 29 has original wiring and is unhacked... if you can wait till the weekend I'll take a bunch of pics for you...
 
Still needed

Hey all, doc got a lil tied up and dosent have ability right now,
aprecate his offer and i understand stuff happens..
so if anyone else has ability lemme know thanks.
 
Back
Top Bottom