Anyone with a Gladiator PCB help me out?

Oryk Zinyo

Well-known member
Joined
Jul 24, 2007
Messages
8,997
Reaction score
134
Location
Bremerton, Washington
I have a non-working Gladiator board and when I was looking over it for obvious problems and reseating the chips I found that the socketed chip in section '2B' looks like an IC or jumper was once attached to two of the legs (11 and 14). Can anyone who owns a board look and tell me what was there?

Thanks.
 
I have a non-working Gladiator board and when I was looking over it for obvious problems and reseating the chips I found that the socketed chip in section '2B' looks like an IC or jumper was once attached to two of the legs (11 and 14). Can anyone who owns a board look and tell me what was there?

Thanks.
Neither of the boards I have has a jumper or anything else on that socket or chip.
 
I forgot to mention that this is the larger "mainboard" on the bottom of this pic:

Gladiator.pcb.jpg
 
Back
Top Bottom