anyone want to trade a pin for a 48-in-1? (New England)

Cartouche

New member
Joined
Dec 5, 2007
Messages
679
Reaction score
3
Location
Southington, Connecticut
anyone want to trade a pin for a 48-in-1? (New England)

This may be a stretch, but I thought I'd give it a shot. I have a stripped, painted black Midway (Galaxian) cab. Nothing really left of it but the coin door, a hacked harness, and the dual transformer assembly/fuses at the bottom of the cab.

There's no way this is going back to a $300 Galaxian without basically dropping a few hundred dollars and lots of hours into it, so I figure I'll turn it into a 48-in-1. Now, I already have a vertical multi, so I'd like to see if anyone wanted to trade a working pin or near-working pin project for a fully working 48-in-1. A neat, clean 48-in-1. Solid, freshly painted cab, new AC wiring, harness, board, cp, marquee, etc. freshly capped 80s arcade monitor, not an lcd. By pin project I mean near working, not a pile of wood rot, corroded board, and melted wires.

I'll build it to order (want side art? or add trackball to the cp? You got it. The cheaper the better? We can go that way, too.), I'll probably use arcadeshop's multi control panel and the happy hours board. I figure through pm's we can decide on a fair trade and proceed. Willing to kick in cash for the right deal. I just figure rather than go the whole cl route, I'd rather deal with someone who has at least some understanding of machines, and I'd get to meet another local pin person. I live in Connecticut.

pins/projects I'm interested in:
early 60s wms pitch & bat
Data East
Wms System 11
Black Hole or Haunted House
Playboy (Stern)
Whitewater
Star Trek: TNG

Thanks,
Marc
 
Back
Top Bottom