keithsarcade
Well-known member
Here we go. Spring cleaning revisited. I will sell anything you want for a few bucks plus shipping, or will give all of it away free if you come and get it (located in Fulton, MO).
1. SI Deluxe Cocktail complete wiring harness and power block (working when last tested)
2. Midway Coin Door Skin & Frame
3. Happ 8-Liner/Zaxxon style coin acceptor (complete w/mech)
4. 19" Monitor Frames (2 to choose from)
5. 19" Monitor Degaussers (3 to choose from)
6. Nintendo Marquee Light Fixture (non working, may just need a bulb and/or starter)
7. Unknown coin bucket lid (3-slot 7" x 11")
8. Hantarex 9000 Chassis w/Remote Board, 2 manuals, 3 schematics (needs long resistor and probably a flyback)
9. Sega Turbo Hi-Lo Shifter (missing knob)
10. Sega Turbo Gas Pedal
11. Sega Turbo VAC Gauge (complete with mount and lamp)
12. Sega Turbo Test Panel (complete)
13. Sega Turbo Coin Bucket (6"H x 5.5"W x 7.75"D)
14. Sega Turbo Speaker Grilles (12" x 12" Subwoffer Grille with frame and 5.75" x 24" Mesh)
15. Remnants of a JAMMA Harness (Edge Connector was removed and a few wires used)
Save this stuff from the landfill. I hate throwing away useable parts, but these are just taking up space here, Ill never use them.
1. SI Deluxe Cocktail complete wiring harness and power block (working when last tested)
2. Midway Coin Door Skin & Frame
3. Happ 8-Liner/Zaxxon style coin acceptor (complete w/mech)
4. 19" Monitor Frames (2 to choose from)
5. 19" Monitor Degaussers (3 to choose from)
6. Nintendo Marquee Light Fixture (non working, may just need a bulb and/or starter)
7. Unknown coin bucket lid (3-slot 7" x 11")
8. Hantarex 9000 Chassis w/Remote Board, 2 manuals, 3 schematics (needs long resistor and probably a flyback)
9. Sega Turbo Hi-Lo Shifter (missing knob)
10. Sega Turbo Gas Pedal
11. Sega Turbo VAC Gauge (complete with mount and lamp)
12. Sega Turbo Test Panel (complete)
13. Sega Turbo Coin Bucket (6"H x 5.5"W x 7.75"D)
14. Sega Turbo Speaker Grilles (12" x 12" Subwoffer Grille with frame and 5.75" x 24" Mesh)
15. Remnants of a JAMMA Harness (Edge Connector was removed and a few wires used)
Save this stuff from the landfill. I hate throwing away useable parts, but these are just taking up space here, Ill never use them.
