Anyone replace a working Q*Bert power supply with a new ArcadeShop one?

[elfyhead]

pics.

1 - just tube
2 - monitor mask on tube
3 - filter glass, on its own
4 - filter glass inserted
5 - bezel

sorry for the quality of the pics - i was kinda in a hurry because the kids are being pains in the arse about homework ><.

the filter glass is 20 1/2" X 16 7/8".

 

[SuperGunGuru]

pics.

1 - just tube
2 - monitor mask on tube
3 - filter glass, on its own
4 - filter glass inserted
5 - bezel

sorry for the quality of the pics - i was kinda in a hurry because the kids are being pains in the arse about homework ><.

the filter glass is 20 1/2" X 16 7/8".

Very cool! Thanks everyone for sharing their knowledge on this. I can definitely see where the filter glass piece would slide in. Elfyhead I really appreciate the measurements. I have a few local places that should be able to take care of it.

 

[ChompingQuarters]

pics.

1 - just tube
2 - monitor mask on tube
3 - filter glass, on its own
4 - filter glass inserted
5 - bezel

sorry for the quality of the pics - i was kinda in a hurry because the kids are being pains in the arse about homework ><.

the filter glass is 20 1/2" X 16 7/8".

Cool, thanks!!!

 

[elfyhead]

no problem. my machine is all torn apart anyway from fixing up the monitor. i didn't measure the thickness, but it seems like it might be 3/32" or so. a bit thicker than 1/16" but not 1/8".

 

[SuperGunGuru]

no problem. my machine is all torn apart anyway from fixing up the monitor. i didn't measure the thickness, but it seems like it might be 3/32" or so. a bit thicker than 1/16" but not 1/8".

That was actually going to be my next question. I wonder if a glass shop can deal with what seems to be an oddball tickness (to me anyway)? I mean maybe it's not uncommon for them who knows. If for some reason they can't do 3/32" I would probably go with 1/8" since I can't imagine the extra 16th of an inch would make it too tight for the shroud and bezel.

 

[blkdog7]

pics.

1 - just tube
2 - monitor mask on tube
3 - filter glass, on its own
4 - filter glass inserted
5 - bezel

sorry for the quality of the pics - i was kinda in a hurry because the kids are being pains in the arse about homework ><.

the filter glass is 20 1/2" X 16 7/8".

Nice work! Yes, that's right, the monitor shroud goes on before the filter glass. I forgot the order.