Anyone know where to get this part?

Virtua fan

New member
Joined
Jan 19, 2009
Messages
115
Reaction score
0
Location
Sussex, Wisconsin
I'm finally almost done restoring one of my SF Rush Alcatraz games, and just found that 2 of the 4 leg leveler mounting plates are missing from my seat mounting base. The other game is missing all 4 leg levelers/mounting plates, so pirating them is not an option at this point.

The manual lists the part number as 80-8010, but I have not been able to find them anywhere. I even tried randomly searhing "leg leveler" on Happ, but have not been able to find any mounting plates that are bent in this way.

Attached is a photo of one of the mounting plates. Does anyone know where I can get 6-8 of the mounting plates/leg levelers?
 

Attachments

  • IMG_5636_edited.jpg
    IMG_5636_edited.jpg
    96.6 KB · Views: 40
I've never seen plates shaped like those on any of my machines but you could take one to a local machine shop and have it made. Or, you could buy a break and build them yourself, I am a strong supporter of new tools...
 
Try actually getting Happ on the phone, see if they have them. If not, you may have to manufacture them yourself.

Third option is to mount some plates for a standard caster (as in, the type an upright cabinet uses), and put those on the back. It should hold up as it's not supporting the entire weight of the cabinet, just the seat area.

Anyways, that's my best for you.
 
I see I'm not the only one looking for these. Apparently Atari made this only for these games. I've been unable to find replacements of the same size. I need about 6 of them myself. I ended up using standard size levelers as a stopgap.
 
Damn, that's what I was afraid of.

I think I'll end up doing the same thing. See if I can either make standard leg levelers work or at least use them temporarily as I figure something else out.

Thanks for the input!
 
Back
Top Bottom