anyone know what part tool things these are

cointech

Active member

Donor 3 years: 2018-2019, 2024
Joined
Nov 2, 2004
Messages
1,627
Reaction score
8
Location
Arlington, Texas
I found them in a box with some arcade stuff.
There are 3 each of the 3 different sizes. 9 total
They feel like aluminum. the longest are about 5 inches long.
They are round.
there is a threaded part right before the fatter part.
Thanks
 

Attachments

  • 048.jpg
    048.jpg
    87.5 KB · Views: 104
Hard to tell in that pic...

Are they spring loaded or anything?
What does the narrow end look like?

I initially thought of a "pin pusher" or "wire wrapping tool".
 
Hard to tell in that pic...

Are they spring loaded or anything?
What does the narrow end look like?

I initially thought of a "pin pusher" or "wire wrapping tool".

they are solid all the way. not hollow on the end and no springs or anything. just a metal shaft
 
Those are pins for ICE's Wheel of Fortune and Wheel A Win.
http://www.icegame.com/p-130-wheel-a-win.aspx

thats what they look like. wheel pin.
although the ones they show are 1, 1.5, and 2 inch and mine look like they are
3.5, 4 and 4.5 inches long unless they measure them a different way.
Maybe they go to a different game?
anyone need them?
thanks
 
i think they measure from the tip of the small end to the start of the treads. they look to be the right sizes for those games if that is how u measure them.. the big fat part is what everyone sees so i would think that part of them should be the same. and the different length parts are on the bottom side so it knows where it is or something to that affect
 
Back
Top Bottom