Anyone here repair Neotec Monitors?

coinopdirect

Member
Joined
Jan 23, 2009
Messages
501
Reaction score
12
Location
Midlothian, Virginia
I have a Neotec NT-600DX (VGA CRT) that needs a cap kit (a couple have popped their tops) and other repairs (a couple of blown diodes / resistors on the chassis and I believe the z diode on the neck board as well).

I don't have the time to deal with it and I would prefer to just pay someone who fixes monitors more frequently than myself as I just hate working on them.

My normal guy is backed up about 6 weeks and I'd like to have it fixed sooner.

EDIT: I decided to buy a new monitor and give this one away.
 
Last edited:
I have a Neotec NT-600DX (VGA CRT) that needs a cap kit (a couple have popped their tops) and other repairs (a couple of blown diodes / resistors on the chassis and I believe the z diode on the neck board as well).

I don't have the time to deal with it and I would prefer to just pay someone who fixes monitors more frequently than myself as I just hate working on them.

My normal guy is backed up about 6 weeks and I'd like to have it fixed sooner.

Change the flyback while you're at it. They are common failures with the 500 and 600DX.

JD
 
Back
Top Bottom