Anyone happen to have some of these

Shawn1976

Well-known member

Donor 10 years: 2016-2025
Joined
Apr 17, 2008
Messages
8,767
Reaction score
460
Location
Saint Augustine, Florida
Rating - 100%
429   0   0
Ok. Was trying again to see if anyone by chance happens to have the larger control panel pin connectors.
I'm looking for a 10-pin and three 12-pins of the connection circled in red.
These are the larger version of this linking pin connector.
The smaller version is on the left.
If anyone happens to have these please let me know.
Thanks
 

Attachments

  • IMG_0052.jpg
    IMG_0052.jpg
    98.3 KB · Views: 116
Was still looking for one of these.
I need the larger .165 in a 12-pin connector.
If anyone happens to have one lying around, please let me know.
Thanks
 
Was still looking for one of these.
I need the larger .165 in a 12-pin connector.
If anyone happens to have one lying around, please let me know.
Thanks

...just an FYI.....it's a .156....and I've been looking for larger one also (with no luck).

Edward
 
Was still looking for one of these.
I need the larger .165 in a 12-pin connector.
If anyone happens to have one lying around, please let me know.
Thanks

0.156" feedtrough connector. Made by ITW Pancon.
The standard version is a 24-pin length and can be cut down to the number of pins you need. Can also buy in smaller pin counts but typically not stocked anywhere.

Part number is MWWS156-1624

I tried buying these from ITW Pancon... and I only get silence in return. Just shot rep another email, I pretty much expect the same non-answer as before.
Molex is sooooo much easier to deal with. Too bad they don't have an equivalent.

Ed
 
We have a huge electronic store a couple blocks away, I gotta buy some buttons tomorrow's I could look there. u need the larger pin style I'll check it out for you
 
Check out Molex 68344 series - .156 custom breakaway headers.

Obsolete or planned for obsolescense (depending on pin count) and non-locking (nothing preventing you from installing one end inverted).

Finally got pricing on the 24 pin ITW Pancons today. Holy cow are they proud of their products!!!

Ed
 
Ya if you could find me a 12-pins in the larger .156 size like the one I showed in the photo, I'd really appreciate it brother.
Keep me posted.
 
0.156" feedtrough connector. Made by ITW Pancon.
The standard version is a 24-pin length and can be cut down to the number of pins you need. Can also buy in smaller pin counts but typically not stocked anywhere.

Part number is MWWS156-1624

I tried buying these from ITW Pancon... and I only get silence in return. Just shot rep another email, I pretty much expect the same non-answer as before.
Molex is sooooo much easier to deal with. Too bad they don't have an equivalent.

Ed

I can't find anyone that stocks this company's product (Mouser, Digi-Key, etc.). I used to buy the 7-pinners from you. I would love 24-pin size. How much are the asking for them?...or, better yet, what would you have to sell them for?

Edward
 
Back
Top Bottom