Anyone gotten the Gamebox JAMMA version?

Tighe

Well-known member
Joined
May 25, 2009
Messages
20,797
Reaction score
825
Location
Richmondville, New York
At the bottom of the page:

http://www.gamebox.hk/Features.htm

20101111.GIF
 
working on it! We do have 4 new joystick a few new buttons, and coming up hollow shafts for just about every new joystick out there... :)
 
working on it! We do have 4 new joystick a few new buttons, and coming up hollow shafts for just about every new joystick out there... :)

Man, I really hope you can get that Game Box looks like very different JAMMA board than what is out there!

I can't wait to see what joystick shafts you will offer! I didn't have any interest custom shafts that would allow your ball tops with a HAPP comp or IL Eurostick.

http://forums.arcade-museum.com/showthread.php?t=179406



Sent from my android phone
 
tighe you make make a sanwa really close to a happ, with a ls 55 spring inside the jlf spring, circle gate or octo gate whichever you prefer and a couple other mods to the microswitches
 
tighe you make make a sanwa really close to a happ, with a ls 55 spring inside the jlf spring, circle gate or octo gate whichever you prefer and a couple other mods to the microswitches

LOL, I don't really care to have ball tops, I just wanted to be able to have a ball top when a friend visits. It was an experiment too.

Sent from my android phone
 
Working on trying to get these, they are pretty cool, basically the 1000 in 1 on a board... To bad the SDRam slot is not for adding games :(
We are working on some joystick fun:
Here is what is coming...
All with hollow shafts and 6mm threading....
Sanwa JLF regular
Sanwa JLF long(3/4 extra for wood panels)
Happ/IL Super/Competition stick (set up for high or low stick on each, I measured these off on IL sticks, hoping Happ is the same)
Ultimarc Mag-Stick Plus
JLW
Tru-Leaf Hollow with 6mm threads(short run, we have this joystick, and not sure if we are happy with it)
Round House/Spitfire/Nixs new stick, etc all the same shaft, we sell them on Ebay but not the store, these will have 6mm threading and hollow shaft

Wolfeel is doing the Wico's, but when he is done we will take over that.

Now the topfire requests are interesting because...what if we just did a ball top swith a button on it....we can run the wires up a hollow shaft :) I'm still debating this one.
 
Last edited:
Working on trying to get these, they are pretty cool, basically the 1000 in 1 on a board... To bad the SDRam slot is not for adding games :(
We are working on some joystick fun:
Here is what is coming...
All with hollow shafts and 6mm threading....
Sanwa JLF regular
Sanwa JLF long(3/4 extra for wood panels)
Happ/IL Super/Competition stick (set up for high or low stick on each, I measured these off on IL sticks, hoping Happ is the same)
Ultimarc Mag-Stick Plus
JLW
Tru-Leaf Hollow with 6mm threads(short run, we have this joystick, and not sure if we are happy with it)
Round House/Spitfire/Nixs new stick, etc all the same shaft, we sell them on Ebay but not the store, these will have 6mm threading and hollow shaft

Wolfeel is doing the Wico's, but when he is done we will take over that.

Now the topfire requests are interesting because...what if we just did a ball top swith a button on it....we can run the wires up a hollow shaft :) I'm still debating this one.

So the Game Box doesn't use the SD card for emulators? Can it run console games? I am still very interested! I ended up picking up some used top fires off a member here, but I would love hollow shaft for a IL Eurostick Comp and ball top with a fire button!
 
Back
Top Bottom