Anyone got a rubber ring kit placement guide for a Taxi?

Mimatt

New member
Joined
Jul 1, 2009
Messages
318
Reaction score
5
Location
Tennessee
Anyone got a rubber ring kit placement guide for a Taxi?

Or could anyone lead me to a link where there is a jpg or pdf of one?

The kit I ordered didn't come with one - just a heads up for anybody who ever thinks of ordering a kit from gameroomguys.com. All the parts are right, but the kit contains no install guide :(
 
Or could anyone lead me to a link where there is a jpg or pdf of one?

The kit I ordered didn't come with one - just a heads up for anybody who ever thinks of ordering a kit from gameroomguys.com. All the parts are right, but the kit contains no install guide :(

It's been my experience many many many times that it doesn't matter who you order from. Sadly it seems all kits are doomed to be missing certain rubbers. As far as a "map" it's not needed. Remove the old rubber and lay it down on a new one. Of course the new one will be slightly smaller which is expected.
 
It's been my experience many many many times that it doesn't matter who you order from. Sadly it seems all kits are doomed to be missing certain rubbers. As far as a "map" it's not needed. Remove the old rubber and lay it down on a new one. Of course the new one will be slightly smaller which is expected.

I've checked my rubbers to the manual - the parts are all there. But they gave me a white shooter tip, instead of black... :/

But it looks like you're right - I should be able to tackle this without the map. Fortunately, most of the rubber sizes were painted under most of the plastics - the only one that doesn't have a measurement was the marilyn drop target. But fortunately, the old rubber has the size on it that's still visible. :)
 
Back
Top Bottom