Anyone a Sega Chihiro expert?

srarcade80

New member
Joined
May 16, 2008
Messages
567
Reaction score
6
Location
Orlando, Florida
This seems to be an impossible topic to dig any info on, i've turned over every stone i can find on the internet on this and i'm still out of ideas.

I have a few network keys that were tested working and sent to me for type 1 and type 3. I can't get any of my type 1 net dimms to recognize the type 1 key and I can't get any of my type 3 motherboards to recognize the type 3 key. They act like no key is installed at all giving an error 31 game board is not compatible with main board error. I've tried 3.03 firmware and 4.02 firmware on the type 1. Haven't changed any firmware on the type 3.

The keys are installed correctly with pin 1 in the correct location.

Jumpers as follows:
Type 1: jp1 = 1+2, jp2 = 1+2, jp3 = 2+3
Type 3: jp9 = 2+3

If anyone has any ideas or suggestions, i'm all ears. Thanks so much!
 
I realize this is several months old, but for the type three, according to my notes, for a netboot setup, the jumpers should be:
jp8 2-3
Jp9 2-3
Jp-10 1-2
I can test this later this week if need be. Just gotta dig out a power supply for the type three I have laying around.
Edit: this is accurate, Jp 9 is set back to 1-2 for gd rom.
 
Last edited:
Back
Top Bottom