Anybody here have a birdie King (I and II) marquee?

Tornadoboy

Well-known member
Joined
Dec 28, 2009
Messages
9,112
Reaction score
1,411
Location
North Attleboro, Massachusetts
Anybody here have a birdie King (I and II) marquee?

I just need some measurements for a custom cabaret I'm building, I need to know how big the artwork actually is to see if a regular marquee will fit with some trimming without hurting the appearance.
 
Hello? It would make my life easier, I'd hate to waste money on a marquee that's doomed not to fit regardless.

Most Birdie Kings were installed as "kits" and the marquee was cut to fit the cabinet they were working with.

If interested I think I have a NOS still with plastic wrap on it, let me know and i will take a look for it.
 
Most Birdie Kings were installed as "kits" and the marquee was cut to fit the cabinet they were working with.

If interested I think I have a NOS still with plastic wrap on it, let me know and i will take a look for it.

Actually what I'm looking for is the dimensions of the actual print on the marquee to see how much of the plastic I can trim back before brackets and such start imposing on the artwork. I'm building a custom cabaret which I used the profile of a Monaco GP mini for the sides (I know, not the most flexible design, but it's what I had available), the back for the MGP marquee is WAY bigger than it needs to be for what I'm building, so I want to see at a minimum how tall it has to be to take an original BK marquee and if the cab will be wide enough, and whether I'll have to redesign things or have a custom marquee made.

I may PM you later on the NOS marquee.
 
Back
Top Bottom