any red alert owners out there ?

wrongdon

New member
Joined
Jan 1, 2010
Messages
481
Reaction score
1
Location
wellington, Ohio
I have an irem red alert,and need to verify what is in these 2 board positions.Looking at the boards as installed in the cab,they would not be on the small top board,but on the middle boards furthest from you,pcb # m-27bc.In my pic,the top left corner,you'll see a populated socket and just below it an empty socket.The schematics if i am reading them correctly show these positions as empty.I feel this game is close to working as the self test seems quite intensive.The graphics displayed match what is shown in the manual and it passes all tests.
thank you for your time.
 
Do I understand that the game works but the socket is empty?
Yes and no..The game will run only in test mode and it will pass the ram and rom tests.But if i turn off the service switch i just get sort of a colorful screen that does nothing.There is a good answer to this question in another thread http://forums.arcade-museum.com/showthread.php?t=123593 . I started another thread thinking i may get better response with a different title.
 
Back
Top Bottom