any metal fab people or know of any?

kcfreeloader

New member
Joined
Sep 13, 2005
Messages
766
Reaction score
30
Location
Clinton, Missouri
I'm needing some panels made up out of 1/8" (+ or - a bit) mild steel sheet. They need to be 6 1/2" squares. I need 10 to 15 of them. I'd prefer something just sheared if possible, but if the price was right cnc cut would be really cool. Then all that thrown into a flat rate box(s). Anyone do that kind of stuff or know where i could get that done?
 
I'm needing some panels made up out of 1/8" (+ or - a bit) mild steel sheet. They need to be 6 1/2" squares. I need 10 to 15 of them. I'd prefer something just sheared if possible, but if the price was right cnc cut would be really cool. Then all that thrown into a flat rate box(s). Anyone do that kind of stuff or know where i could get that done?

I know a guy :)
I would need a sample and min run would be 25.
 
I have a metal shear, how many would you be looking for? Give me an exact number and I will give you a price for them shipped.
 
Im out, my shear wont cut the 1/8" steel. I have done 1/8" aluminum on it before but it doesnt want to think about going through the steel. I used to have access to a hydraulic shear that would cut 1/2", that thing was awesome.
 
I'm making a swappable control area.
1/8" is probably way heavy. I could probably go with less but i need something that wont distort when i weld studs to it.

Here's an illustration.
sideviewofswaparea.png
 
I'm making a swappable control area.
1/8" is probably way heavy. I could probably go with less but i need something that wont distort when i weld studs to it.

Here's an illustration.
sideviewofswaparea.png

If they are all the same, I can do pressed in studs.
 
Back
Top Bottom