Any interest in skeeball parts?

keithsarcade

Well-known member
Joined
Nov 27, 2008
Messages
8,875
Reaction score
160
Location
St Peters, Missouri
Rating - 100%
232   0   0
I recently aquired some skeeballs (these are the classic models from the 80's, 13'). I'm going to set up 2 of them for freeplay and will likely part the third out (UPDATE: I'm fixing the third one as well now, so this list is now updated). So parts I know I have are:

2 working coin mechs w/counters (not sure if the counters are working)
2 working ticket feeders and an extra ticket feeder frame
2 coin buckets
1 beacon lamp assembly with lock ring & amber lens (will need new bulb and wiring spliced from your game). This is not from a skeeball but will work the same.
1 beacon lamp base only (again, not original skee-ball, but will work with a spliced harness)

I may also have a ball release lever and actuator up for grabs, but don't know for sure yet.

If there's any interest, let me know and Ill put photo's up on request.

So does anyone need anything?
 

Attachments

  • sb1.jpg
    sb1.jpg
    92.6 KB · Views: 60
  • sb2.jpg
    sb2.jpg
    96.8 KB · Views: 53
Last edited:
Added photos, as you can see, these beasts have taken over my basement.

I should have taken photo's of the coin counters. They are reading 999,800 and 999,801 respectively. What are the odds?
 
Can I get the lengths on the yellow trim pieces and ticket dispenser cover? I've got one I might be looking for a few parts for. Would also be interested in a handfull of screws that hold down the yellow trim pieces, and the front chrome piece (under the angle) if it isn't too dented from balls being bashed into it. Possibly the score rings with angle brackets if taken off of the board, and sand bags...
 
Sorry, I should have updated this. Looks like Ill be saving all 3 of these. So I need to hold on to the trim pieces.. I can however let coin mechs, coin buckets & ticket feeders go. Ill update the first post. If that changes I will let you know. I can probably rob the ticket feeder cover if you need it.
 
Back
Top Bottom