- Joined
- Aug 3, 2009
- Messages
- 5,152
- Reaction score
- 534
This is fitting in my theme of having twins games since I have a pair of twin boys. Mario Bros, DD, Operation Thunderbolt, SF2 ...
So I had a game listed on CL for a couple of weeks trying to sell it when a kid emails me asking if his DD cab would be worth anything for trade up to my machine listed. I then asked for a description of it and it was clearly a dead dedicated DD. He was only 10 from me so I went to check out the machine in his garage man cave. It was dead but still an original alternate color DD with only one good sized ding on the left (facing) side right against the T-molding.
We plugged it in and it showed nothing but the marquee and coin door lights. I didn't want to mess with it saying that it obviously need to be completely gone over.
Sorry for the blurry phonecam pics. I have not pulled the good pics off of my real camera yet. Stupid DSL line is acting very slow...
He turns out didn't have any cash to buy up to my machine so I offered $60 cash for his machine and he said, "sure, better than nothing" He actually got the thing for free from friend that won it from a Golfland.
I got it home after going back at night (after Chinese New Year Dinner)
I started pulling it apart.
• MB was dead
• Fuses were falling out but I just put them back in and tested for continuity – good.
• Pulled the whole K7000 monitor and threw it on my test rig. It came up and I adjusted the colors and sizes. Cleaned the tube up and put it back in (holding off on the cap kit and rejuv/clean for later)
• Cleaned up the mother board tray and looked over the wiring in there.
• I dropped in a DD board from my other DD project (I have a converted grey DD machine stored, and bought a DD kit from a KLOV'r)
• Dropped in the DD Control panel that I had been cleaning up – restoring
• Swapped the cracked marquee for the one I had from the kit.
• Removed the lock bars
It still needs
• A total clean up of sides and all of the interior dust.
• Rebuild the coin door that's a little worn and bent
• New front glass to replace this acrylic replacement.
• Monitor caps and Rejuv/Cleaning
• New locks all around.
Now I have a pair of these alternate color cabs. The only ones I've ever seen are my two and Eseyos. http://forums.arcade-museum.com/showthread.php?t=160356
So I had a game listed on CL for a couple of weeks trying to sell it when a kid emails me asking if his DD cab would be worth anything for trade up to my machine listed. I then asked for a description of it and it was clearly a dead dedicated DD. He was only 10 from me so I went to check out the machine in his garage man cave. It was dead but still an original alternate color DD with only one good sized ding on the left (facing) side right against the T-molding.
We plugged it in and it showed nothing but the marquee and coin door lights. I didn't want to mess with it saying that it obviously need to be completely gone over.
Sorry for the blurry phonecam pics. I have not pulled the good pics off of my real camera yet. Stupid DSL line is acting very slow...
He turns out didn't have any cash to buy up to my machine so I offered $60 cash for his machine and he said, "sure, better than nothing" He actually got the thing for free from friend that won it from a Golfland.
I got it home after going back at night (after Chinese New Year Dinner)
I started pulling it apart.
• MB was dead
• Fuses were falling out but I just put them back in and tested for continuity – good.
• Pulled the whole K7000 monitor and threw it on my test rig. It came up and I adjusted the colors and sizes. Cleaned the tube up and put it back in (holding off on the cap kit and rejuv/clean for later)
• Cleaned up the mother board tray and looked over the wiring in there.
• I dropped in a DD board from my other DD project (I have a converted grey DD machine stored, and bought a DD kit from a KLOV'r)
• Dropped in the DD Control panel that I had been cleaning up – restoring
• Swapped the cracked marquee for the one I had from the kit.
• Removed the lock bars
It still needs
• A total clean up of sides and all of the interior dust.
• Rebuild the coin door that's a little worn and bent
• New front glass to replace this acrylic replacement.
• Monitor caps and Rejuv/Cleaning
• New locks all around.
Now I have a pair of these alternate color cabs. The only ones I've ever seen are my two and Eseyos. http://forums.arcade-museum.com/showthread.php?t=160356
Attachments
Last edited:

