Another DK Restore.

jimkirk

Well-known member
Joined
Mar 9, 2008
Messages
9,355
Reaction score
1,075
Location
California
I restored my DK this last summer and never got around to posting pics.
I know it is not a real "restore" but the cab was pretty trashed and painted an ugly black.
I didn't take any before pic,I am terrible about that,but took some after pics.
I still need to get a DK cpo from mamemarquees as I need a vinyl cpo since I have a trackball on the cp.
I have another original cp that needs to be painted and put back together.
This DK was jammatized when I bought it so I put a 6 in 1 switcher in with DK,DKJR,GALAGA,PAC-MAN,DIG DUG & a 60-1 boards.
I only have room for 2 cabs so this was a good comprise for me since my other game is an Area 51/Max Force.
The coin door has original finish and is perfect.:)
 

Attachments

  • IMG_0002A.JPG
    IMG_0002A.JPG
    92.9 KB · Views: 37
  • IMG_0001A.JPG
    IMG_0001A.JPG
    96.3 KB · Views: 26
  • IMG_0004A.JPG
    IMG_0004A.JPG
    75.9 KB · Views: 30
  • DSCN0192a.JPG
    DSCN0192a.JPG
    67.7 KB · Views: 28
Last edited:
I don't know if you're technically allowed to use "restore" in your thread title if there's a trackball on the CPO... :eek:

Looking good on all other facets, though. I am hyperjealous of your coin door!!!
 
Looks great! Nice solution if you don't have much space. It's good that you still have an original CP to swap out too.

I'm guessing you have the original CPO instruction card with the red text on the last two lines? ;)
 
Here are some pics of the inside and one I found that was taken before the restore.The switcher is behind the Pac-Man board and under the coin box shelf.

attachment.php

attachment.php

attachment.php
 

Attachments

  • DSCN0136.jpg
    DSCN0136.jpg
    101.9 KB · Views: 61
  • DSCN0138.jpg
    DSCN0138.jpg
    104.6 KB · Views: 61
  • DSCN0039.jpg
    DSCN0039.jpg
    99.8 KB · Views: 61
I don't know if you're technically allowed to use "restore" in your thread title if there's a trackball on the CPO... :eek:

Looking good on all other facets, though. I am hyperjealous of your coin door!!!

The rest of the cab was repaired and painted as it was pretty bad.
New side art,T molding, and coin door. I also have a harness,marquee fixture,power supply and Sanyo monitor should I need to put it back to all original.
I have another cp that has a NOS overlay with an original instruction card that has the red lettering Eseyo1;)
I only put the track ball for the 60 -1
I am going to put a vinyl DK cpo in place of the current cpo.
 
Back
Top Bottom